System Setup
Press and hold the power button to turn
on the receiver.
Unscrew handheld transmitter battery
compartment and insert batteries, ensuring
polarities are correctly matched (+)(-).
Open body-pack transmitter battery cover and
insert batteries, ensuring polarities are correctly
matched (+)(-).
Once the channel is selected, wait (3 seconds)
for the flashing to stop. The channel is now set.
Press and hold
or
for 1 second.
The channel display begins flashing. Press
(forward) or
(backward) again to select an
interference-free channel. See next page for
interference-free channel selections.
OPE
N
Adjust the transmitters to the same channel as
the receiver. ‘1’ is equal to the first frequency
in Group 1. ‘2’ is equal to the first frequency in
Group 2.
Turn off the transmitter when switching
frequency to avoid pops.
DE3 Channel & Frequency
(
11
) 482.625 MHz
(
12
) 486.825 MHz
(
13
) 488.225 MHz
(
14
) 491.550 MHz
(
21
) 495.775 MHz
(
22
) 506.300 MHz
(
23
) 507.700 MHz
(
24
) 511.375 MHz
HH2 Channel & Frequency
(
11
) 863.300 MHz
(
12
) 864.300 MHz
(
13
) 824.875 MHz
(
14
) 830.850 MHz
(
21
) 863.700 MHz
(
22
) 864.700 MHz
(
23
) 824.400 MHz
(
24
) 828.650 MHz
Channel
MHz
11
482.625
12
486.825
13
488.225
14
491.550
Group 1
Channel
MHz
11
863.300
12
864.300
13
824.875
14
830.850
Group 1
Channel
MHz
21
495.775
22
506.300
23
507.700
24
511.375
Group 2
Channel
MHz
21
863.700
22
864.700
23
824.400
24
828.650
Group 2
When operating multiple channels in parallel, all systems must stay within one of the groups below to
avoid interference (max of four simultaneous channels per band).
Frequency
DE3:
482 - 492 MHz,
495 - 512 MHz
HH2:
824 - 831 MHz
863 - 865 MHz
Press power button for 4 seconds to turn on body-
pack/handheld transmitter. Hold power button for
4 seconds to turn off. Click power button to mute.
When the setup is completed, the receiver will
receive RF signal and the RF indicator will light red.
