Audio Technica AT-LPW50PB Скачать руководство пользователя страница 14

Страница: 14 / 18

Replacing the belt

• The belt is a consumable part. Replace the belt if the speed of

playback slows down or irregular rotation occurs. As a rule of thumb,
we suggest replacing the belt once a year.

• Before replacing the belt, be sure to disconnect the product’s AC

adapter from the outlet.

1. Remove the rubber mat.

2. Remove the platter, turn the platter over, and then remove the old

belt.

• Place your thumbs in the openings and pull up strongly.

3. Place the new belt around the inner circle.

• Be careful not to twist the belt while doing this.

Belt

4. Attach the platter.

• Align one of the openings with the position of the motor pulley (brass-

colored).

Opening
Motor pulley

(brass-colored)

5. Place the belt on the motor pulley (brass-colored).

• Grasp the belt that was attached in step 3 and, while pulling it, place it on

the brass motor pulley.

Motor pulley

(brass-colored)

Содержание AT-LPW50PB



















Результаты поиска

Содержание AT-LPW50PB

Отзывы:

Похожие инструкции для AT-LPW50PB

Бренды по названию

Популярные бренды

Audio Technica AT-LPW50PB, Руководство пользователя

Результаты поиска

Содержание AT-LPW50PB

Отзывы:

Похожие инструкции для AT-LPW50PB

Бренды по названию

Популярные бренды