9
Playing a record
Pausing the record
1. After lowering the volume of the amplifier, speakers,
etc. sufficiently, press the tonearm lift button to lift the
tonearm.
Stopping the record
Once the record has played to the end, the tonearm will
automatically return to the tonearm rest.
To manually stop the record, do the following.
1. Lower the volume of the amplifier, speakers, etc. sufficiently.
2. Press the STOP button.
•
Once the record stops playing, the tonearm automatically
returns to the tonearm rest.
3. Remove the record after the platter has come to a
complete stop.
•
When the tonearm reaches the end (center) of the record, it will
automatically lift and return to the tonearm rest. Do not interfere
with its motion. Doing so can cause the product to malfunction.
If the tonearm does not lift and return to the tonearm rest, press
the STOP button to complete this operation.
•
If the felt mat gets dirty, it can easily scratch the record, so
remove the felt mat periodically and wipe off any dust.
•
To prevent the record from scratches and warping, remove it
after use.
•
Do not use a disk stabilizer.
•
Do not use a platter other than the one provided.
•
This product is not intended for DJs. Do not touch the record or
the platter while the record is playing.
How to use with Headphones
1. Lower the volume of the product, then connect the input
plug to the headphone jack.
AT-LP60XHP
2. Place the headphones with the side marked “L” over your
left ear and the side marked “R” over your right ear, and
adjust the headband length by sliding the adjustable slider
so that the earpads cover your ears.
3. Refer to “Automatic operation” on p. 8 or “Manual
operation” on p. 8 to play a record.
•
When the headphones are connected, and you keep the wired
connection (amplifier, speaker, etc.) turned on, the sound will be
heard from both the headphones and wired devices. Adjust the
volume of the headphone volume control knob or device you
want to use for playback.
