5
Preparation for use
Rotating the platter
1. Using your hands, rotate the platter ten times.
•
Remove the tie that locks the tonearm and press the
tonearm lift button to lift the tonearm. Slowly rotate the
turntable ten times by hand in the direction of the arrow.
•
You may want to hold the tonearm to prevent it from
moving. This step is for resetting the auto mechanism,
getting rid of any twists in the belt and making sure the
belt rides smoothly along the drive rim on the underside of
the platter.
Connecting the AC adapter
This product does not have a power switch. A standby current
is always running through the product, even when it is not
being used; disconnect the AC adapter from the outlet when
not using the product for a long period of time.
1. Connect the AC adapter to the outlet.
•
Connect the AC adapter to the outlet without removing
the cartridge’s protector. If the platter has rotated, press
the STOP button without touching the tonearm, and then
wait until the tonearm returns to its original position.
Wireless/wired connection
You can connect to a speaker, etc. via Bluetooth technology or
RCA audio cable.
When using Bluetooth, refer to “Connecting via Bluetooth
wireless technology” on p. 6.
When connecting with the RCA audio cable, refer to
“Connecting the device” on p. 7.
•
Volume adjustment cannot be performed if there is no volume
adjustment on the connected speakers, etc.
AT-LP60XBT
AT-LP60XBT
AT-LP60XBT
Wired connection example
Active speaker
or
Amplifier
Wireless connection example
Wireless headphones
or
Wireless active speaker
Tonearm
