Audio Technica AT-LP60-BT, Инструкция по установке и эксплуатации

Страница: 3 / 56

English
3
Main Features
Figure 1
Front Back
PHONO LINE
ANALOG
OUT
START SPEED STOP
12"
7"
SIZE
AT-LP60-BT
WIRELESS TURNTABLE
33
45
1
START BUTTON
Engages the motor/platter and begins automatic operation.
2
STOP BUTTON
Disengages the motor/platter and returns tone arm to rest.
3
TONE ARM LIFT BUTTON
Lifts and lowers tone arm for manual selection.
4
PLATTER SPEED BUTTON
Select 33 RPM (button in high position) or 45 RPM
(button in low position) platter speed.
5
WIRELESS FUNCTION BUTTON (with Indicator LED)
Use to perform initial pairing with a Bluetooth receiver device
(speakers, headphones, receiver, sound bar, et al.) and to start/stop
wireless signal transmission.
6
SIZE SELECTOR
Select the size of the record: 12” or 7”.
7
PLATTER
Aluminum platter mounts directly to center spindle/
motor shaft.
* Illustration shows platter with turntable mat placed on top of it.
8
CENTER SPINDLE
Centering pin for record positioning.
12
10
9
45-RPM ADAPTER (shown in receptacle)
Adapts 7” records with large center holes to fit center spindle.
10
DUST COVER HINGE HOLDERS
Attachment points for removable hinged dust cover.
11
DUST COVER
12
TONE ARM/HEADSHELL ASSEMBLY
Tone arm is permanently attached to the headshell
assembly.
13
STYLUS ASSEMBLY
14
STYLUS (“NEEDLE”)
15
STYLUS GUARD
16
PRE-AMPLIFIER SELECTOR SWITCH (PHONO/LINE)
(On back of turntable) Use PHONO setting when you connect to
the phono input on your home stereo via output cable. Use the
LINE level when you connect to CD/TAPE/AUX inputs of your
home stereo via output cable.
17
ANALOG OUT
Use this output to connect to your home stereo or powered
speakers via the included 3.5 mm stereo mini-plug to dual RCA
output cable.
1
7
PHONO LINE
ANALOG
OUT
START SPEED STOP
12"
7"
SIZE
AT-LP60-BT
WIRELESS TURNTABLE
33
45
PHONO LINE
ANALOG
OUT
START SPEED STOP
12"
7"
SIZE
AT-LP60-BT
WIRELESS TURNTABLE
33
45
2 3
8
5
9
10
16 17
13
14
15
11
4
6