Audio System SW 11 ACTIVE, Руководство пользователя

Страница: 3 / 4

SW
The SW 11 ACTIVE has RCA LOW-LEVEL inputs to connect it to the pre-output connection of the headunit
using a RCA cable. When using RCA connections you also have to connect the remote input (blue) to remote or
antenna out of headunit.
If your car radio doesn‘t have RCA outputs (normally OEM radios) you can connect the speaker outputs directly to
the HIGH-LEVEL inputs of the
SW 11 Active . The amplifier will turn on automatically with remote wire.
Fig. 1: Connection variant Low-Level
Fig. 2: Connection variant High-Level Fig. 3: Connection
RTC SW
All settings can be adjusted by
using the
RTC SW
wired
remote.
You can adjust the gain, bass
boost, low-pass-filter and phase
to match the car and your pre-
ferred sound setup.
SW
COnnection SW 11 PASSIVE
AMPLIFIER
It is possible to connect the SW 11 PASSIVE in different configurations. By this you can use the subwoofer
as 2x 2 Ohm (figure), 1x 4 Ohm (row) or 1x 1 Ohm (parallel) subwoofer.