Congratulations on your purchase of your new
r
series
/
m
series
amplifeier
features
Before installation your power amplifier, we recommend to read the
manual's owner carefully and to follow the instructions regarding connection and
fitting exactly.
We advice to accomplish the installation by an authorized service center, because
a professional fitting and connection is the requirement for further warranty
adjustments.
-2-
2-Channel High Power Class-AB amplifier with SMD technology
MOS-FET Power Supply
Stable into 2 ohm stereo per channel and 4 ohm bridged mode
Variable switchable Low Pass Filter from 50 to 300 Hz
Variable switchable High Pass Filter from 25 to 175 Hz
Variable switchable Band Pass Filter from 25 to 175 Hz and from 50 to 300 Hz (LPF)
FSA Front Stage adjuster for analog phase correction for the left front channel
High-Level-Input with automatically „TURN ON“
Input Sensitivity: variable 200 mV maximum to 8 V minimum
M
ulti-
W
ay
P
rotection
C
ircuitry: overheating, overcurrent, short circuitry and speaker DC protection
Operating Voltage: DC 10 ~ 16 V Power Input
Massive heavy aluminum-heatsink
Wired Remote Controller
RTC
(Optional)
R
195.2 /
m
135.2
r
105.
4 /
m
80.
4
4-Channel High Power Class-AB amplifier with SMD technology
MOS-FET Power Supply
Stable into 2 ohm stereo per channel and 4 ohm bridged mode
Variable switchable Low Pass Filter from 50 to 300 Hz
Variable switchable High Pass Filter from 25 to 175 Hz
Variable switchable Band Pass Filter from 25 to 175 Hz and from 50 to 300 Hz (LPF)
FSA Front Stage adjuster for analog phase correction for the left front channel
High-Level-Input with automatically „TURN ON“
2CH / 4CH input mode selectable button
Input Sensitivity: variable 200 mV maximum to 8 V minimum
M
ulti-
W
ay
P
rotection
C
ircuitry: overheating, overcurrent, short circuitry and speaker DC protection
Operating Voltage: DC 10 ~ 16 V Power Input
Massive heavy aluminum-heatsink
Wired Remote Controller
RTC
(Optional)
R+M
