Audio Research Reference Phono 3, Руководство пользователя

Страница: 17 / 22

17
Display Brightness
The display brightness feature offers six
different settings (including off) for the
vacuum fluorescent display on the front
panel. When the lowest setting (off) is
selected, the display will remain on for
five seconds after any button is pushed,
after which it will revert to a black screen
with a small, illuminated square in the
center to indicate the unit is powered on.
To change the display brightness, press
the ‘MENU’ button until ‘DISPLAY
BRIGHTNESS’ appears. Press the ‘OPTION’
button. Continue to press the ‘OPTION’
button to change the display brightness to
your preference. Once you have selected
the appropriate brightness, there is no need
to press ‘ENTER’ or any further buttons.
Note
The remote control offers direct control
of the display brightness via two buttons
labeled ‘DISP UP’ and ‘DISP DN’. You
can choose to use these buttons as an
alternate to the settings menu.
Operation
Equalization
The Equalization feature allows different EQ
curves to be employed for listening.
To change the EQ settings, press the ‘MENU’
button on the front panel or the remote
until the display shows ‘EQUALIZATION’
with the currently selected setting below.
Press the ‘OPTION’ button to toggle
through the three settings, and press
‘ENTER’ when the appropriate setting is
selected.
Note
The equalization settings can be changed
directly from the remote control by
selecting one of the three EQ buttons
located at the bottom, ‘RIAA’, ‘COLUMBIA’,
and ‘DECCA’.