Audio Research CD 6SE, Руководство пользователя, Страница: 8 / 18

8
Digital Connections
The CD6SE offers four digital inputs, and two
standard digital output options. Which option
is best for your system will depend on your
personal listening preference, the nature of
your system installation requirements, and
the options allowed by your external digital
processor, if one is used.
Digital Inputs
Toslink: Connect to a transport, computer
or other device equipped with Toslink (optical)
digital output. Press the INPUT button until
the ‘Toslink’ LED is illuminated.
USB:
Connect to a Windows-based PC or
Mac computer for music playback from your
computer. Press the INPUT button until the
‘USB’ LED is illumindated. Note: you must
install the software on the included CD (also
downloadable from www.audioresearch.
com/downloads.html) to utilize the USB
connection.
RCA:
Connect to a transport or other device
equipped with an RCA digital output. Press
the INPUT button until the ‘RCA’ LED is
illuminated.
Digital Outputs
BNC: Use 75-ohm impedance coaxial cable
with locking BNC-type connectors. An RCA/
BNC adaptor is also supplied.
AES/EBU:
For connection to digital processors
having the AES/EBU-Standard interface.
Analog Outputs
Single-Ended (RCA): For connection to
the inputs of a line-level preamplifier or
integrated amplifier.
Balanced (XLR):For connection to the
balanced inputs of a line-level preamplifier.
Warning
The digital outputs supply only a digital signal
and should therefore only be connected to an
input which is suitable for this signal. Never
connect either of these digital outputs to a
non-digital input of a preamplifier (such as
those labeled CD, AUX, PHONO, TAPE, etc.)
or to a power amplifier. To do so is to risk
damage to your system and may void any or
all warranties involved.
Connections
CD6 Manual.indd 8 1/6/17 5:18 PM
AES/EBU:
Connect to a transport or other
device equipped with an AES/EBU digital
output device. Press the INPUT button until
until the AES/EBU LED is illuminated.
USB: Connect to a Windows-based PC or
Mac computer for music playback from your
computer. Press the INPUT button until the
‘USB’ LED is illuminated. Note: Software
installation is not necessary for Mac or Linux
users. Windows users can find the necessary
software drivers at www.audioresearch.com
under the Download tab.