background image

rEar

1. Bass rEFLEX port

2. BaTTErY lid for clock battery

     

insert 2 x AAA batteries for clock memory back-up. if no batteries or too weak batteries are installed  

  the battery indicator (d on previous page) will blink in the display window.

3.  Fm External antenna

    Connect the enclosed external FM antenna if reception is poor.

    you can also connect a communal aerial.

4.  anTEnna switch.

    select inTeRnAl or eXTeRnAl antenna.

5. main POWEr switch

    When unit is set in standby on the front panel it is not totally off (standby mode).

    Turn this switch to OFF to totally turn off the unit.

    nOTe: The On/sTAndBy switch on the front panel can only work if this switch is set to On.

6.  15V dC in

    Connect the external AC adaptor to run Radio One.

7. LinE in input

    Connect an external audio device with 3,5 mm connector.

    select line in as source.

8. HEadPHOnEs

    Connect headphones with a 3,5 mm stereo plug.

   The speaker output will be muted while headphones are connected.

9. sUBWOOFEr output

    For enhanced bass sound performance you can connect an external powered subwoofer.

OVeRVieW

RAdiO One

R-10 & R-20BT

dC plug 2.1 mm

Содержание R-20BT Radio One








Отзывы: