Audio Pole PX3 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 9

Audio Pole PX3 Скачать руководство пользователя страница 6

6

3

Functions

Back Panel

1

–

Mains and fuse

Power supply socket. Make sure that the cable plug is correctly inserted in the socket.

The compartment located below the socket contains the fuse. In the event of change, it is imperative to
use a fuse with identical electrical characteristics under threat of damage to the unit.

2

–

Input connectors

Euroblock balanced inputs

3

–

MODE

Mode selector:
In case the input signal is already filtered and the three channel including the SUB are already
available, use the selector on position SUB. Every channel will be amplified without any filtering.

If the input signal (stereo) needs a separate amplification for the low frequencies, push the selector on
position CHA + CHB. The device filters and amplifies signal A + B to feed the Subwoofer with the low
frequencies only.

4 –

X-OVER FREQ

Cut off frequency selectors for hi-pass (CH A, CH B) and low-pass (SUB) filters. The value can be set
from 50 Hz to 250 Hz.

5, 6 & 7 –

Speakers connectors

Euroblock speakers output.

8

–

Vent grille

Check that the vent grille is not obstructed.

6

«
...
4
5
6
7
8
...
»

Содержание PX3










Отзывы:

Нет отзывов