Select the data with
PM2
and
PM3
and browse with
NAV/PM1
. The password cannot exceed more than 6
characters. Press
ENTER
to display (example with «DPA240»):
Press
ENTER
to display:
NOTE
:
To unlock the devise the password is necessary. It is recommended not to forget it, and to memorize
it somewhere. In case this password is lost, it is necessary to make a total reset of the device. In this case all
settings and parameters will be lost forever.
b. CONFIRM THE PASSWORD
Press
UTILITY
and use
NAV/PM1
to display:
Press
ENTER
and use
NAV/PM1
to display:
Press
ENTER
to display:
Press
PM2
, and select « Enable ». This option works only if the password is known.
c. UNLOCK THE DEVICE
Follow the instructions as described on
Simple Lock
.
It is possible to make all parameters invisibles: see paragraph
3
.
At this stage the device is fully locked: none of the button is active, except
UTILITY
, which enables the password input.
In case the password is forgotten or lost, only a full reset of the device is possible. The reset is the factory status
when purchasing the device for the first time: all parameters and presets are lost forever.
3- DISPLAY UNLOCK
Whatever the choices, the parameters can be invisible.
Press
UTILITY
and use
NAV/PM1
to display:
Press
ENTER
and use
NAV/PM1
to display:
Press
ENTER
, then with
PM2
,
select « Parameter will not be shown » for display locking, « Parameter will be shown » for display
unlocking.
The current status is indicated with an asterisk on the right corner of the screen.
Press
ENTER
.
USER’S MANUAL DSP 24
page 8
