Audio Pole CLIMAX 3200 DSP, Руководство пользователя

Страница: 5 / 24

Controls
5
3
A - Front panel
1- POWER
Power ON/OFF switch.
By default, when the device is switched on for the first time, both channels activate in MUTE mode. To change,
refer to page 11, paragraph 3.
2 - OUTPUT
The LED brightness is proportional to the output current. It becomes visible when the current exceeds 1A.
3 - SIG
The green LED is illuminated when the voltage level at the output reaches approx. 4 V. This value corresponds
to a power of 4 W at 4 Ohms. The red LED is illuminated when the device is in Protect Mode (Mute).
4 - SAT
The red LEDs are illuminated if any section of the power amplifier’s output are within 3dB of clipping. However,
Leds blinking are acceptable. Constantly lit, it is advisable to reduce the amplifier volume.
5 & 6 - Volume controls and DSP settings
These buttons are coders wheels and push buttons. They control the volume and the DSP settings.
Volume control:
The input level can be adjusted by rotating the CHA and CHB knob.
Parameters control:
After selecting a function(11), press to navigate through the LCD screen, turn the button to modify a setting and
confirm by pressing it once again.
7 - LCD screen
The LCD screen displays current and important amplifier information (Gain, Temperature, Mode…).
8 - USB slot
DSP programming via USB slot.