7
TROUBLESHOOTING GUIDE
Refer to the relevant sections in the manual for remedy suggestions.
SYMPTOM
CHECK POINT
No sound from the CD player.
CD input is not selected on the amplifier.
Playback does not start.
The disc is dirty.
The disc is upside down.
The player is in the PAUSE mode.
Moisture condensation has caused the unit to
operate incorrectly.
"NO DISC" appears.
There is no disc loaded or the disc is loaded
incorrectly.
The disc is dirty.
The disc is upside down.
Playback does not start from the first
track.
The player is in the PROGRAM or RANDOM
mode.
Press the STOP (
■
) button to cancel the
program mode or RANDOM button to cancel
random mode.
IMPORTANT INFORMATION
Compact disc player have built-in error compensation circuits to correct minor
manufacturing defects on a disc. In some cases, defects on the disc, which are too large
for the error compensation circuits to handle, may cause the CD player to skip some
tracks during playback. If this problem occurs, play a new disc, normal playback of the
new disc indicates that the previous disc is damaged in some way. However, if the
problem continues, it is best to have the unit serviced.
SPECIFICATIONS
Optical pick-up:
3 beam laser
Semi-conductor laser:
780 nm
Power source:
AC 100-120V/220-240V 50/60 Hz
Output impedance:
Less that 2 kohm
Reference output:
3.0V RMS (approx.)
Channel balance:
Less that 0.5dB
Tube compliment:
2 x ECC88
Fuse:
220/240V
1 x 250 mA Slow blow (T type)
1 x 500 mA Slow blow (T type)
100/120V
1 x 500 mA Slow blow (T type)
1 x 1 A slow blow (T type)
Dimensions:
446 (W) x 145 (H) x 420 (D) mm
(incl. connectors)
Weight:
8 kg
Max power consumption: 48W
Содержание CD 3.1x/II
Страница 1: ...CD 3 1x II CD PLAYER OWNER S INFORMATION...
