background image

 

Please take care when unpacking your

 

AX-ONE loudspeakers. Choose a clean, clear 

location to unpack them. Before attempting to unpack or lift the loudspeakers, check 
the  weight  and  if  necessary  use  more  than  one  person  so  that  they  can  be  moved 
safely and easily. 
 
We  recommend  that  you  retain  and  carefully  store  all  of  the  original  packing 
materials, in case transportation / shipping is required at a later date. 
 
Select  a  suitable  location  for  the  loudspeakers.  This  should  be  a  dry,  dust  free  and 
level  area,  preferably  shielded  from  direct  sunlight  and  free  from  vibration.  Also 
ensure  that  the  location  is  stable  and  capable  of  carrying  the  weight  of  the 
loudspeakers. 
 
The ported enclosure of the AX-ONE has been designed to be placed close to room 
boundaries (where the bass performance is augmented significantly by the additional 
reinforcement  from  the  nearby  walls),  whether  standing  on  a  high  mass  stand 
(available separately) or lying on its side on a rigid shelf.  
Some experimentation is advised when choosing a suitable location to obtain the best 
performance 

ʻ

in  room

ʼ

.  All  rooms  are  different,  both  physically  and  more  importantly 

acoustically,  so  there  are  no  definitive  rules  regarding  loudspeaker  positioning. 
However,  we  generally  recommend  placing  the  loudspeakers  in  corners  or  at  least 
against  a  solid  rear  wall;  this  is  the  best 

ʻ

starting  point

ʼ

  to  work  from.  If  bass 

performance  is  too  strong,  slowly  move  the  loudspeakers  further  into  the  room, 
making sure that the distance between the rear and side walls remains the same for 
both loudspeakers.  
If  there  is  a  noticeable 

ʻ

hole

ʼ

  in  the  middle  of  the  two  loudspeakers,  producing  a 

pronounced 

ʻ

left / right

ʼ

 effect, move them closer together in small increments, until a 

solid, central presentation is achieved. 
You  may  also  find  a  degree  of 

ʻ

toe-in

ʼ

  to  be  appropriate;  angle  the  loudspeakers  so 

that  both  front  faces  are  visible  and  pointing  directly  towards  the  main  listening 
position.  A  few  degrees  of  movement  in  either  direction  –  revealing  more  or  less  of 
the  cabinet  sidewalls  when  viewed  from  the  listening  position  –  may  also  be 
advantageous. 
Once  a  suitable  position  offering  the  most  acceptable  bass  and  stereo  presentation 
has been found, make sure the loudspeakers are level and securely positioned. The 
use of a spirit level for accurate levelling is advised, and a small amount of 

ʻ

Blue Tack

ʼ

 

will secure the loudspeaker cabinets to their stands or shelves. 
 
If you experience any difficulty positioning your AX-ONE satisfactorily, please consult 
your  Audio  Note  (UK)  Dealer,  who  will  be  happy  to  assist  you.  Alternatively,  please 
contact us directly. 
 
As we design all our speakers to be primarily used with good valve amplification the 
AX-ONE  will  always  perform  at  its  best  when  partnered  with  a  suitably  composed 
Audio Note (UK) system. 
However, it will also give good results when partnered with a wider range of valve and 
transistor amplifiers. 

 
 
 

UNPACKING AND INSTALLATION 

Содержание AX-ONE













Отзывы: