SCD-012-01-x Installation & Operation Manual
Document # 540106, Rev B, 06/2001
Page 9 of 16
2.2
If damage has occurred during shipping, a claim should be filed with Audio
International WITHIN 24 hours and a Return Request Authorization
Number shall be obtained from AI. Refer to the front cover of this manual
for address and telephone number of Audio International, Inc. Repackage
the unit in its original packaging materials and return it to AI following
instructions given by the AI representative.
If no return is necessary,
retain the packing list and the packing materials for storage.
3.0
Cautions & Warnings
3.1
It is important to do a pin-to-pin power and ground check on all
connectors.
Ensure that power and ground are applied only where
specified. Damage to the unit may result if power or ground is applied to
the wrong points.
3.2
DO NOT connect or disconnect the unit while power is applied.
3.3
DO NOT drop the unit or subject it to strong shock. The unit contains
glass parts that may break or crack.
3.4
DO NOT touch the liquid crystal fluid if the LCD is damaged or broken. If
the fluid from the LCD display contacts your body or clothing, wash it off
with soap immediately.
3.5
DO NOT use commercially available CD accessories that can be loaded
into the CD slot (stabilizers, protective sheets, CD cleaning discs, etc.).
They can cause the unit to malfunction
.
3.6
DO NOT use dirty CD’s or CD’s colored on the data side. If you try to play
CD’s that are colored on the recorded side (opposite the label), or CD’s
that are dirty, they may fail to slide in or out. Also, do not put tape on CD’s
and attempt to insert into the unit. This could cause failure or damage to
the unit.
3.7
NO scheduled maintenance is required to ensure continued airworthiness.
3.8
ESD (Electro Static Discharge) guidelines shall be followed.
