DVD-9101-101-x Installation & Operation Manual
Document # 540311, Rev A, 10/2006
Page 8 of 27
3.3
Cautions & Warnings
3.3.1 It is important to do a pin-to-pin power and ground check on all
connectors. Ensure that power and ground are applied only where
specified. Damage to the unit may result if power or ground is
applied to the wrong points.
3.3.2
DO NOT
connect or disconnect the unit while power is applied.
3.3.3
DO NOT
remove any factory-installed screws. Damage to the unit
may result and void any warranties.
3.3.4
DO NOT
drop the unit or subject it to strong shock. The unit
contains glass parts that may break or crack.
3.3.5
DO NOT
place foreign objects into openings. Contact with foreign
objects may result in dangerous voltage or electric shock.
3.3.6
DO NOT
place near strong magnetic fields, radiators or other heat
sources.
3.3.7
DO NOT
use this unit other than for its intended purpose. Doing so
might lead to electric shock or injury.
3.3.8
DO NOT
use near water, moisture, or volatile sprays. Do not use
any type of solvent when cleaning (surface damage may occur).
3.3.9
DO NOT
expose unit to sun or bright light.
3.3.10 The chassis material and structural design of this unit is such that
the unit is not capable of containing fire within the unit. This unit
does not provide for waterproof operation.
3.3.11 Operating temperature should not exceed –15C to +55C.
3.3.12
ESD
(Electro Static Discharge) guidelines shall be followed.
