Audio International, Inc. CL12/16 Watt Series Cabin Light
Installation & Operations
Document #540037, Rev. B, 4/2000
Page 5 of 11
2.0 Application
2.1 Introduction
The CL12/16Wxx-xx series cabin lights are halogen reading lights that
delivers maximum color correct illumination. The beam is specially
focused for even light intensity and comfortable viewing.
A raised trim ring allows easy one-hand adjustment. The lights contain an
internal fan for cooling purposes. The light assemblies are built to rugged
aircraft standards and are easily incorporated into new or existing lighting
systems.
3.0
Installation
3.1
Prior to Installation
Prior to installation, the following items should be considered:
3.1.1 During the design and layout of the aircraft cabin, careful
consideration of the location of this light is necessary. Some of the
items to be considered include space and available power supply.
3.1.2 The lighting assembly can be mounted in any location that will allow
the unit to connect with the aircraft lighting system. The selected
location must have an opening prepared for the unit to be inserted
and mounted. Refer to section 6.0 for unit dimensions and
mounting hole locations.
3.1.2 The CL 12/16 Watt Series Cabin Light shall be installed to conform
to the standards designated by the customer, installing agency, and
existing conditions as to the unit location and type of installation.
3.1.4 Mounting screws are required to secure the unit. Refer to Section
7.0, Reference Drawings, for mounting hole diameters and
configuration.
3.2
Unpacking and Inspection
Carefully open the packaging and remove the unit. Verify that all
components have been included in the package per the packing list.
Inspect the unit for damage. Retain the packing materials and packing
list.
If damage has occurred during shipping, a claim must be filed with AI
within 24 hours and a “Return Request Authorization Number” must be
obtained from AI. Refer to the front cover of this manual for address and
telephone number of Audio International. Repackage the unit in its
original packaging materials and return it to AI following instructions given
by the AI representative. If no return is necessary, retain the packing
materials for storage or reshipment if necessary.
