Audio Innovate AEM-100, Руководство пользователя

Страница: 5 / 16

5
“LINE1/PHONO1” switch set to “PHONO1”
Right CD source goes to “LINE 2” using a dual RCA cord.
“LINE3/PHONO2” switch set to “PHONO2”
For powered speaker or amplifier connection, either use XLR cables on the “MASTER
BALANCED OUTPUT” or RCA cables on the “MASTER” output.
Connect “Fader Start A” using a mono 1/8” jack cable to the left CD player input marked
“Remote”.
Connect “Fader Start B” using a mono 1/8” jack cable to the right CD player input marked
“Remote”.
***Only turn the power switch on once you have finished the hookup, understand the setup,
and set all faders to minimum volume.
FRONT PANEL
Connect a microphone to the “MIC1” input
Connect the headphones either to the 1/8” or 1/4” socket above “PHONES” depending on the
headphone jack size.
Set the “FADER START” to “OFF” for now.
Set the “CROSSFADER” to “OFF” for now.
Set the “FADER CUTS” to “NORMAL” for now.
***Please note that all of these settings are simply for getting up and running quickly for the first
time with a basic audio setup. Most likely you purchased this product for its advanced features
and hookups. Please only use these options once you are familiar with the product and practice
at home before you attempt to use them in a live situation.