Remote Volume Control of the
Teacher and Student Microphones
Pairing Microphones to Your Receivers
UP
Volume
DOWN
Volume
Teacher Microphone
(OWN) Level Adjustment
Student Microphone
(OTHER) Level Adjustment
Teacher Microphone
Student Microphone
The “SELECT” button determines which level
will be controlled by the UP/DOWN buttons
3
Multimedia Level Adjustment
Press either the UP or DOWN
arrow button to increase or
decrease the level of the
Teacher microphone. A blue
LED
over the
OWN
(for own
microphone) will flash with each
press.
To adjust the Student
Microphone (
OTHER
) volume,
first press the
SELECT
button so
that the LED over the
OTHER
label comes on. Now press the
UP/DOWN buttons to control the
level of the
OTHER
microphone,
which is typically the Student
Microphone.
Your XD microphones should already be
paired to the receiver. You can check this
by turning on your Teacher and Student
Microphones (Teacher Mic: press
PWR
for 1 second; Student Mic: flip
TALK
switch up). If the
LED
under the
BATT
indicator turns green, the mic is paired. If
the
LED
blinks another color (orange),
then turn off your microphones and use
the following instructions to pair them to
the receiver.
Teacher
M
ic
Stude
nt M.
Turn mic off: flip the
TALK
switch down.
The green
BATT light will extinguish.
Press the
LINK
button on the receiver
(LINK LED will blink yellow).
Press and hold the
LINK
button and flip up
the
TALK
switch on the Student Microphone
until the microphone links. You will know it is
linked when the BATT LED on the
microphone and LINK LED on receiver glow
green and an audible beep will sound
through the speakers.
Turn mic off: press and hold
PWR/MUTE
until the green
BATT
light extinguishes.
Press the
LINK
button on the receiver (LINK
LED will blink yellow).
Press and hold the
PWR/MUTE
and
REC
buttons on the Teacher Microphone until
the microphone links. You will know it is
linked when the
BATT
LED on the
microphone and
LINK
LED on receiver glow
green and an audible beep will sound
through the speakers.
Selecting the LINE audio source
will control the volume of audio
devices that you have plugged
into the “Line In” input on the XD
receiver.
DC - 40758.01 XD
www.AudioEnhancement.com • 800.383.9362
