Remote Volume Control of the
Teacher and Student Microphones
Pairing Microphones to Your Receivers
UP
Volume
DOWN
Volume
Teacher Microphone
(OWN) Level Adjustment
Student Microphone
(OTHER) Level Adjustment
Teacher Microphone
Student Microphone
The “SELECT” button determines which level
will be controlled by the UP/DOWN buttons
3
Multimedia Level Adjustment
Press either the UP or DOWN
arrow button to increase or
decrease the level of the Teacher
microphone. A blue LED over the
OWN
(for own microphone) will
flash with each press.
To adjust the Student Microphone
(
OTHER
) volume, first press the
SELECT
button so that the LED
over the
OTHER
label comes on.
Now press the UP/DOWN buttons
to control the level of the
OTHER
microphone, which is typically the
Student Microphone.
Your XD microphones should already be
paired to the receiver. You can check this
by turning on your Teacher and Student
Microphones (Teacher Mic: press PWR for
1 second; Student Mic: flip TALK switch up).
If the LED under the BATT indicator turns
green, the mic is paired. If the LED blinks
another color (orange), then turn off your
microphones and use the following
instructions to pair them to the receiver.
Teacher
M
ic
Stude
nt M.
Turn mic off: flip the
TALK
switch down.
The green
BATT light will extinguish.
Press the
LINK
button on the receiver
(LINK LED will blink yellow).
Press and hold the
LINK
button and flip up the
TALK
switch on the Student Microphone until
the microphone links. You will know it is linked
when the BATT LED on the microphone and
LINK LED on receiver glow green and an
audible beep will sound through the speakers.
Turn mic off: press and hold
PWR/MUTE
until
the green BATT light extinguishes.
Press the
LINK
button on the receiver (LINK
LED will blink yellow).
Press and hold the
PWR/MUTE
and
REC
buttons on the Teacher Microphone until the
microphone links. You will know it is linked
when the BATT LED on the microphone and
LINK LED on receiver glow green and an
audible beep will sound through the speakers.
Selecting the LINE audio source
will control the volume of audio
devices that you have plugged
into the “Line In” input on the XD
receiver or Input 3 on the CA-60 if
the RS232 lines are connected.
DC-40562.01 XD
www.AudioEnhancement.com • 800.383.9362
