Manufactured by Audio Engineering Associates:
1029 N. Allen Ave. Pasadena, California 91104, USA
Tel: +626-798-9128 Fax: +626-798-2378 www.ribbonmics.com
The bar can be attached directly to a vertical stand as
shown. Microphones can be mounted to hang from the bar
using the 5/8-27 thread of the TA-2s.
6.
By cutting the foam insert in two, the TA-3 can be inserted
from the inside of the channel allowing the stand to be
mounted with microphones above the bar.
7.
The bar can be mounted to a boom using the Posi-Lok
adapter. The Posi-Lok is rigid enough to suspend the bar
and mics at a variety of angles, not just the hanging position
shown.
8.
