AMPLIFIER 1
OR CHANNELPAIR 1/2
FOR MIDBASS SPEAKER
AMPLIFIER 2
OR CHANNELPAIR 3/4
FOR MIDBASS SPEAKER
TWEETER LEVEL ADJUSTMENT MG2X
Bi-AMPING MG2X
To adjust the tweeter level, you have to remove the cover of the crossover
and select the desired combination on the jumper at the bottom left. Carefully
pull out the jumper and insert it in the desired position.
The following combinations are possible:
By removing the contact bridges at INPUT - and INPUT +, the crossover can
also be operated in bi-amping mode. This allows you to operate the midbass
speaker and the tweeter separately with an amplifier or channel pair.
S1 – Position 1 = 0 dB
S1 – Position 2 = - 2 dB
S1 – Position 3 = - 4 dB
S1 – Position 4 = - 6 dB
S1 – Position 5 = - 8 dB
LEFT
RIGHT
L
L
R
R
