In-Dash
tm
THREE.2
Owner’s Enjoyment Manual
9
Figure 4: Rear View of the THREE.2
B. THREE.2 Power Wiring
•
ENLIGHTENING INFO
• Disconnect the negative
terminal of your car’s battery before working on any electri-
cal connections. Failure to do so could lead to a dramatic
spark in your life.
Remote Turn-On:
Connect a 22 to 18 gauge wire from
the head-unit’s remote turn-on to the “Remote” connector on
the THREE.2.
Po12V) Connection:
Insert an 18 gauge or
larger wire into the connector labeled “Power” on the nifty
connector of your THREE.2. Connect it to a good, constant
fused source of 12 volts (we suggest the battery).
Ground Connection:
Use the same gauge wire as you
did for the positive connector and run it from the “Ground”
connector on the THREE.2 to the negative terminal of the
battery, a ground buss, or a verified ground location. The fac-
tory head unit ground is
not
recommended.
Illumination:
The connector labeled “Illumination”
on your THREE.2 provides power to the backlighting of your
unit. Connecting it to a switched 12 volt source, such as the
“Remote” will light up the backlighting of your THREE.2.
A really cool idea is to connect the illumination wire to a
factory dash light dimmer and have the ability to dim the
backlighting of the THREE.2 with your dash lights.
Power
Remote
Ground
Illumination
Power Connector
Aux In
