Audio Control M6400 / M4800 / D4600
Crestron Driver User Guide
4
Module Definitions
AudioControl_{Model} _Comms_VX_XX.umc
The central module handling all communications between Crestron and the amplifier. This
module will require a "TCP/IP Client" device to be configured in the SIMPL Windows
program, with the IP address of the amplifier defined, and the port
defined as “
23
”
.
Signal Name
Type
Description
CommsConnect
Input
Signal FROM TCP/IP Client 'Connect-F'.
CONSOLE_COMMAND
Used to send console commands to module
Get Status
Get the current status of the audio control
ZoneCommsRx
Signal FROM Zone modules
GroupCommsRx
Signal FROM Group modules
Zone[x]_Group1
Adding and removing a zone to a group*
Zone[x]_Group2
Zone[x]_Group2
Zone[x]_Group2
CommsConnected
OUTPUT
Signal TO TCP/IP Client 'Connect'.
Zone1CommsTx
–
Zone10CommsTx
OUTPUT
Signal
TO
one
or
more
AudioControl_ZoneAnalogue.umc modules.
1 to 8
Signal
TO
one
or
more
AudioControl_ZoneDigital.umc modules.
9 and 10
Group1CommsTx
–
Group4CommsTx
OUTPUT
Signal TO one or more AudioControl_Group.umc
modules.
Zone[x]_InGroup1
OUTPUT
Feedback indicating which zones are in which
groups.
Zone[x]_InGroup2
Zone[x]_InGroup3
Zone[x]_InGroup4
IP Address
PARAMETER Ip address of the Audio Control
Port
PARAMETER Port number of the Audio Control Default 23
Poll Time
PARAMETER Time Between each poll (in Minutes) 0 = No Poll
*AudioControl supports 4 groups; these groups can contain any number of zones. A zone
can only be associated to one group at any one time. If you set the zone to a group when
the zone is already associated to another group, then the zone will be removed from its
current group and added to the new group.
SetZone[x]_ToGroup[x]
works like a toggle button
–
pulse it
to add the zone to the group.
