2
Introduction
Model 906G control panel is designed to control a
single product group in AccessEZ™ audio and video
demonstration systems. The 906G can switch
up to 99 products in a group (with the appropriate
number of switch modules), deselect products, and perform A/B comparisons.
Multiple 906G control panels may be used in one system, each panel controlling a
different product group (
see Figure 2
). A single group may also be controlled by two
different 906G control panels (
see Figure 3
).
Setup
Before permanent installation, set the GROUP rotary switch (
Figure 1
) on the back
of the 906G to match the product group number of the group it is to control. Set
the ELEX / SPK switch to ELEX unless the 906G will be controlling 932, 934 or
939 speaker switching modules (e.g.,
Figure 4
). If you want to control one product
group from two different room locations (Master/Slave configuration,
Figure 4
) set
the 906/906A switch to 906A on one of the control panels.
SYSTEM BUS
GROUP
906
906A
SPK
ELEX
Figure 1.
906G rear detail view.
audioauthority.com/access_tips
• Tips
• Examples
• FAQ
System Bus
Digital Audio
HDMI
Figure 2.
Switching system for 8 soundbars with dedicated source and video monitor.
980
956
956
906
Digital A - V
Source
0/00
0/01
805-021
Power
Supply
Soundbar
Video Monitor
Soundbar