Audient iD4, Руководство пользователя

Страница: 26 / 33

23
Operation with Cubase / Nuendo
If using Windows, ensure that you have
followed the installation instructions found
on
page 6 .
With iD4 plugged into your computer,
launch Cubase or Nuendo and head
straight for the Devices Menu:
Devices > Device Setup...
Select VST Audio System in the devices
menu.
Ensure that Audient iD4 is selected as the
audio device. You will be asked if this is OK,
select ‘switch’.
Select Audient iD4 in the devices menu,
here you will see the main iD4 information.
Buffer sizes can be set in the Control Panel
within the VST devices display.
Close the VST device setup panel and
navigate to the VST connections panel:
Devices > VST Connections (F4)
Here you can ensure that all buses have
been created in Cubase / Nuendo and
therefore all ports are addressable in your
session. Add new buses and assign them
to the necessary I/O if required.
If using the iD4 Monitor Mix knob to
monitor your inputs, ensure that input
monitoring is turned off on the track.
CUBASE/NUENDO SETUP