USER´S
MANUAL
Bubble
40
1
6
Read the manual prior to using the unit. Follow the instructions in order not to
invalidate the warranty. Take all precautions to avoid fire and/or electrical
shock. Repairs must only be carried out by a qualified technician in order to
avoid electrical shock. Keep the manual for future reference.
- The unit contains voltage carrying parts. Therefore do NOT open the housing.
- Do not place metal objects or pour liquids into the unit This may cause
electrical shock and malfunction.
- Do not place the unit near heat sources such as radiators, etc. Do not place
the unit on a vibrating surface. Do not cover the ventilation holes.
- The unit is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A faulty or damaged
mains lead can cause electrical shock and malfunction.
- When unplugging the unit from a mains outlet, always pull the plug, never the
lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they need to be replaced by
a qualified technician.
- If the unit is damaged to such an extent that internal parts are visible, do NOT
plug the unit into a mains outlet and DO NOT switch the unit on. Contact your
dealer. Do NOT connect the unit to a rheostat or dimmer.
- To avoid fire and shock hazard, do not expose the unit to rain and moisture.
- All repairs should be carried out by a qualified technician only.
- Connect the unit to an earthed mains outlet (220- 240Vac/50Hz) protected by
a 10-16A fuse.
- During a thunderstorm or if the unit will not be used for a longer period of time,
unplug it from the mains. The rule is: Unplug it from the mains when not in use.
- If the unit has not been used for a longer period of time, condensation may
occur. Let the unit reach room temperature before you switch it on. Never use
the unit in humid rooms or outdoors.
- During operation, the housing becomes very hot. Do not touch it during
operation and immediately after.
INSTALLATION
Attention:
• Be sure that the bubble machine is positioned on a stable, non-slip surface.
• Be sure that no ventilation slots on the product’s housing are blocked.
• Don’t put any objects on the bubble machine.
• Never connect the bubble machine to a dimmer or rheostat.
• Keep the housing of this bubble machine dry at all times.
• Do not spill water or other liquids into reservoir.
• Drain the reservoir before transporting or storing the product.
• Never drink bubble liquid or use it on the inside or outside of a human body. If
fluid gets in contact with skin or eyes, rinse thoroughly with water and call a
doctor immediately!
• Keep out of the reach of children.
• For indoor use only.
FILLING RESERVOIR
Step 1: Place the bubble machine on a flat level surface.
Step 2: Fill the reservoir with Bubble Liquid (front of the machine). Make sure
that you do not fill the reservoir above the fill line. Filling above the line will result
in damage to the machine.
Step 3: After the usage, please empty the remaining liquid to prevent damage
as well.
WIRELESS REMOTE CONTROL
The wireless remote control have 4 buttons. Press one of the buttons (A,B,C or
D) and the machine will produce bubbles as long as you press the button.
