Bluetooth
®
Technology
Initial Setup
Once a compatible phone is paired, it will reconnect each time you start
the vehicle.* Your contact list will automatically synchronize, allowing
you to access contacts and make and receive calls through the
Infotainment system. Bluetooth is not available when Apple CarPlay
®
is active.
To pair a phone:
1.
Turn the ignition on with vehicle in Park.
2.
Activate your phone’s Bluetooth.
3.
Open the Bluetooth menu on your phone, ensure “Audi MMI XXXX”
(last four digits of VIN) appears as an option.
4.
Select
Phone
on the touch display to view available Bluetooth devices.
5.
Select
Connect mobile device
.
6.
Select your device from the device list. Press the Refresh icon
if the device is not displaying.
7.
Select Pair on your device once the PIN on your phone matches the
one generated by the MMI. This confirmation step pairs your phone.
8.
Select Allow on your device to sync contacts.
•
Open the Bluetooth submenu
on your device and enable Show Notifications, Sync Contacts and Apple CarPlay
for iOS devices.
Some devices may require a selection to allow access to the address book.
*Some phones may require a response to automatically connect upon re-entering the vehicle. Once paired, the Bluetooth symbol appears on the
display status bar along with network strength bars and will be displayed whenever a paired phone is connected to the Multi Media Interface.
Switch Between Paired Phones
A primary and secondary phone can be paired to the vehicle. To swap the primary/secondary order, from the vehicle touch
display select
Phone
. The secondary will now be primary and vice-versa.
Voice Recognition
Enable online speech dialog system:
1.
On the MMI, select
Settings
.
2.
Select
General
.
3.
Select
Speech dialog system
.
4.
Consent to speech dialog system online recognizer, provide consent by sliding button to the right.
•
A short press of the Voice Recognition button
on the multifunction steering wheel will activate MMI voice
recognition.
•
You can also control audio, navigation and telephone functions with voice recognition commands, such as
“Play FM 103.5.”
•
When a compatible device is connected, a long press of the Voice Recognition button
will enable voice recognition
with your phone’s digital assistant. Use commands such as
“Call Mary Smith, mobile”
or
“Call last number dialed.”
To switch voice recognition system off:
•
Press and hold the Voice Recognition button
on the multifunction steering wheel. You can also say
“Cancel”
or press
Cancel on the touch display.
Media
Media and Audio
The Multi Media Interface can access multiple media sources,
including compatible Bluetooth-connected devices, USB-connected
devices, onboard Radio/Satellite sources, online media (via Wi-Fi
hotspot) and SD cards. Bluetooth streaming is not available when
Apple CarPlay is active.
To access a media source:
1.
Select
Media
on the touch display.
2.
Select
Source
and choose from the available options.
To connect additional mobile devices (after two phones are paired):
1.
Select
Media
.
2.
Select
Source
.
3.
Select
Connect external device
.
4.
Activate the Bluetooth menu on the external device.
5.
Select
New connection
and select from available Bluetooth devices displayed. Press the Refresh icon
if the device
is not displaying.
6.
A PIN will be generated. Confirm the PIN on your mobile device.
Bluetooth
®
, Voice Recognition & Media
Warnings: Bluetooth Audio Player
See Bluetooth Audio Player in your Owner’s Manual for more detailed information and for important safety warnings.
Warnings: Voice Recognition System
See Voice Recognition System in your Owner’s Manual for more detailed information and for important safety warnings.
Warnings: Media
See Media in your Owner’s Manual for more detailed information and for important safety warnings.
Содержание Q3 2021
Страница 1: ...Quick Questions Answers 2021 Audi Q3...