7.
Connect the 22-way Molex plug on Adapter harness (See
Fig. 3
) to the
22-way connector on Main Module (See
Fig. 4
)
Fig. 4
22-way Molex connector
8.
Dip switches
1 & 8
must be set “ON”
(See
Fig. 5
)
or consult user
manual included with adapter.
Fig. 5
dip-switches
9.
Connect the 8-pin
DIN to RCA
OR 8-pin
DIN to 3.5mm
cable (See
Fig.
6
) to the Main Module. (See
Fig. 7
)
Fig. 6
audio cables
Fig. 7
8-pin DIN input
10.
Route the 3.5mm plug to the front of the dash or location where audio
device will reside (within 6 ft.)
Test Operation:
1.
Turn the R
adio “ON”
2.
Press the “
CD
”
button to enter CD Changer Mode
3.
Connect audio device to gray Audio cable (See
Fig. 8
) or RCA jacks.
Fig. 8
3.5mm plug
4.
Search the device for a song and press play.
5.
Use radio volume control button to set the playback level.
Warning!
Playlist and Track selection is *NOT* possible from the VW
Group radio. You must use the audio devices built-in controls to access
audio files.
6.
If correct operation is confirmed go ahead and reinstall Radio
** External or remote CD Changer refers to the optional Changer installed
on the lower dash, center armrest, hatch, trunk etc. (external CD Changer
is not the Changer built-into the head unit)