Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
37
●
The tailgate control unit master J605 communicates with the tailgate control unit slave J756 via a single-
wire bus specified by systems supplier Valeo (no LIN bus).
●
Via the wake-up line, the tailgate control unit master J605 can wake up the tailgate control unit slave J756.
This is the case if the convenience CAN bus is reactivated in Sleep Mode, or if the interior tailgate release is
operated while the convenience CAN bus is in Sleep Mode. The slave tailgate control unit wakes up the
master control unit J605 if manual operation of the tailgate is detected .
●
The function block of the rear right power latching motor shows two sensors. They have the task of
monitoring the two end positions of the power latching system and informing the convenience system
central control unit when they are reached.
Softtouch
in the tailgate
Convenience system central control unit
J393
Terminal 30
Co
n
v
e
n
ie
nc
e
CA
N
bu
s
Interior tailgate
release
Tailgate control unit
- slave -
J756
Sensors
Magnetic coupling
344_036
Terminal 30
Magnetic coupling
Sensors
Tailgate control unit
- master -
J605
Tailgate lock
Power latching
system
