Audemars Piguet Calibre 2385, Инструкция по эксплуатации

Страница: 10 / 12

35
uSE
of fu
N
ct
Io
NS
seTTing The Time
on certain royal oak models, always unscrew the
crown to access the different setting positions.
Pull the crown to position D . You may now set the
time by winding in either direction without risk of
damaging the movement. it is advisable to set the
hand five minutes past the desired time and then
to move it back to the exact time.this allows the
gears to re-align themselves, thus ensuring optimal
precision.
warning : for watches with date display, do not
confuse noon and midnight when correcting the
date.
rapid daTe seTTing
to avoid making any mistakes, it is recommended
to perform date changes when the mechanism is
not in operation, i.e. between 1 am and 6 pm at the
latest.
on certain royal oak models, always unscrew the
crown to access the different setting positions.
if the correct date is not displayed on the watch, pull
the crown to position
C
(rapid date correction) and
turn clockwise until the desired date is displayed.
on certain royal oak models, always screw the
crown back to position
A
to ensure water-
resistance.
winding The waTch
on certain royal oak models, always unscrew the
crown to access the different setting positions. the
unscrewed crown will automatically position itself
at
B .
turn the crown at least 30 times (in position B )
to wind the watch. the movements of the wearer's
wrist will then activate the automatic system and
keep the watch running.
warning : the automatic winding system will not
work if the watch is not worn. the watch can then be
stopped before the 40 hours power reserve according
to its initial winding.
E
NGLISH