m. Beep Sound
Select BEEP SOUND (will be highlighted in RED) and select OK. This gives you the
option to enable or disable the audible sound on the device.
There are two options to select from: On or Off
Press “Up” or “Down” to select the required option and press “OK” to confirm.
Pres
s “Back” to return to standby.
n. Microphone
Select MICROPHONE (will be highlighted in RED) and select OK. This gives you the
option to mute or unmute the microphone.
NOTE:
We would always recommend that the Microphone is set to Unmute
There are two options to select from: Mute or Unmute
Press “Up” or “Down” to select the required option and press “OK” to confirm.
Pres
s “Back” to return to standby.
o. Light Sensitivity
Select LIGHT-SENSITIVE (will be highlighted in RED) and select OK. This option gives a
clearer picture in dark conditions when IR is used.
There are three options to select from: Low, Medium or High
IMPORTANT NOTE: This option only has any value when the Infrared Switch (O) is
set to “Auto”
Press “Up” or “Down” to select the required option and press “OK” to confirm.
Press “Back” to return to standby.