AUDAC WX MK2 Series, Руководство пользователя и инструкция по установке

Страница: 6 / 12

6
Installing the WXMK2
Mounting the speaker
The loudspeaker can be mounted both horizontally and vertically through the supplied
mounting bracket. For mounting the loudspeaker on the desired mounting location,
the mounting bracket should be removed from the loudspeaker, which is done through
loosening the thumbscrews on either side of the loudspeaker. After this is done, the
bracket can be taken apart from the loudspeaker.
For a stable mounting of the loudspeaker it should always be fastened by two screws.
The position of the mounting holes depends on the mounting orientation, horizontally or
vertically. The fixation points of the bracket should be marked on the desired location
and the bracket can get mounted. The type of used fasteners shall be chosen according
to the most suitable type for the mounting surface (brick, concrete, wood, ...).
The bracket dimensions and mounting hole positions are indicated in the below drawing
and table for the various sizes of speakers.
Ø4,5
Ø10,3
B
A
Model Dimension A Dimension B
WX302MK2 174 mm 108 mm
WX502MK2 219 mm 160.4 mm
WX802MK2 358 mm 248 mm
Once the bracket is mounted onto the desired position, the speaker can be re-assembled
to the bracket by inserting and tightening both thumb screws on either side of the speaker.
The speaker can be tilted in various steps of inclination into the desired listening direction.