AUDAC VEXO110, Руководство пользователя

Страница: 12 / 16

VEXO1xxA - User manual 012
DSP functions
The DSP functions can be adjusted via the AUDAC Touch™ 2 app when the optional ANI44XT Dante™ audio network
interface module is installed. The AUDAC Touch™2 app can be downloaded for free via the AUDAC website, Google play
or Apple App store. After the adjustment, the new DSP settings can be applies to the VEXOxxA via a flash drive thanks
to the provided USB port. When the ANI44XT module is installed, the DSP is updated live.
Talkover : The talkover functionality ducks other music sources to a certain level so spoken messages can be heared.
Only analogue input channels and Dante 1 can be used as a source for talk over messages.
Line out : The “line out” selects the signal to be output. You can choose between:
Signal / EQ / EQ + Delay.
Standby : Standby mode can be enabled or disabled. The duration when standby is activated can be adjusted in the
app. The default standby time is 20 minutes.
Anti phase: Phase shift is an audio effect that exploits the way sound waves react to each other when they are out of
phase. Phase shift is most likely used to align top/sub speakers or to correct cables that have reversed phase.
Noise gate
:
A noise gate reduces any noises when there is no signal connected.
TouchLink : TouchLink™ is a system that can be used for creating virtual zones by linking multiple compatible devices
with each other. In AUDAC Touch™ or directly on the device you can select multiple devices that should react to the user
as one zone. More information about TouchLink™ can be found on the following URL:
https://audac.eu/innovations/d/touchlink
4-band input EQ
:
The four-band equalizer frequencies are infinitely adjustable within a range of 20 Hz to 20 kHz, while
the Q-factor (bandwidth) is adjustable within a range of 0.05 to 15. The amplification or attenuation of each band can be
adjusted within a range of +30 dB to -30 dB.
7-band output EQ
:
The seven-band equalizer frequencies are infinitely adjustable within a range of 20 Hz to 20 kHz,
while the Q-factor (bandwidth) is adjustable within a range of 0.1 to 15. The amplification or attenuation of each band can
be adjusted within a range of +15 dB to -15 dB.
Delay
:
This function enables to create a specific delay between the input and the output signal. This delay can be used
for time alignment between different loudspeakers in one configuration. It is configurable within a range of 0 to 30mS (up
to 10 meter).
MAX volume
:
The volume for the speaker can be limited at a certain level. The maximum output volume for this speaker
will be limited at the selected level. The maximum volume can be adjusted witjin a range of -70dB to -0dB.
Dynamic bass boost
:
Dynamic bass will make a correction depending of the level (volume) in the low frequencies. This
correction will make that music will sound warm and detailed (with true reproduction of low frequencies) at low volumes,
but with increasing level (volume) the low frequencies will be weakened. This will result in less distortion due to reduced
low frequencies at high volumes, allowing the loudspeaker to handle higher sound pressure levels with less distortion. It
can be switched ON and OFF, whereby OFF means that dynamic bass is disabled and ON means that a level dependent
correction in the low frequencies is made.