PROFESSIONAL AUDIO EQUIPMENT
Bidirectional Sound Projector SP202
Installation Guide
Sound Projector
SP202
AUDAC
Страница 1: ...PROFESSIONAL AUDIO EQUIPMENT Bidirectional Sound Projector SP202 InstallationGuide SoundProjector SP202 AUDAC ...
Страница 2: ...Also make sure that the mounting location Wall Ceiling is solid enough to support the weight of the loudspeaker 2 The two bolts whereby the loudspeaker is attached to the U shaped mounting bracket are meant to focus the speaker into the desired direction You can loosen those bolts a bit for focusing the speaker and when it s in the right position tighten the bolts again Notice that those bolts are...
Страница 3: ...ations Connections for 100 Volt use COM Blue 20 Watt Red 10 Watt Yellow 2 5 Watt Green Always connect the pole of the amplifier output to the COM Blue core The pole of the amplifier can be connected according to the table above for the desired output power When the loudspeaker is connected to 70 7V facilities the power indicated in the table above will be reduced to half the power and when connect...
Страница 4: ...Watt 2 x 10 Watt 500 Ohm 10 Watt 2 x 5 Watt 1000 Ohm 5 Watt 2 x 2 5 Watt 2000 Ohm Line Voltage 100 V Driver impedance 8 Ohm Sensitivity 1W 1m 91 3 dB SPL Max W 1m 92 dB Frequency response 110 Hz 18 kHz Material Aluminum Weight 2 4 Kg Speaker 2 x 5 Colour White Mounting Aluminum U Bracket Connection cable length 1 5m IP Rating IP56 ...
