AUDAC Outdoor Series, Руководство пользователя и инструкция по установке, Страница: 7 / 12

7
ATTENTION
To make sure that no rain or other liquids can enter the loudspeaker when mounted
outside, a special construction is provided at the inner side of the bass port. This
construction is only functional when the loudspeaker is mounted in the correct position.
The loudspeaker must be mounted according to the woofer orientation as shown below.
When mounting upright, the tweeter shall be on top of the woofer, when mounted
sideways the tweeter shall be on the right side of the woofer.
Step 2: Power settings
The power tap of the WXMK2/O speakers can be selected depending on the orienta-
tion of the waterproof connector on the rear side of the loudspeaker. A white dot is
displayed on the cable part of the connector. Depending on the direction of the white
dot, the desired power tap is connected. The corresponding power taps are shown
on the sticker on the rear side of the loudspeaker. The power / impedance of the
loudspeaker can be set in 3 adjustable steps of impedance for 100V and 1 step for
standard low impedance applications.
WX802
MK2
16 Ω
60W 15W
Outdoor - IP55
70 Watt RMS / 140 Watt Max
Impedance: 16 Ω
Line transformer power taps (100V) :
60 Watt / 167 Ω
30 Watt / 333 Ω
15 Watt / 667 Ω
30W