AUDAC OPT2, Руководство по установке

Страница: 5 / 7

5
Step 5:
Connect the other side of the flatcable to the OPT2 module. In case there is a flatcable
supplied with 2 extra connectors, please use the connector nearest by the DSP!
Reassure the polarity of both connections!
Step 6:
Remove the nuts from the module, and place the module in the chassis.
Make sure to place the module in the right way. That is, with the connectors at the
side of the DSP. It might be necessary to move the suppression coil to the right to
make some space.
Suppression Coil
Pin 1
Pin 1