AUDAC Multi-functional SourceCon MFA208, Руководство пользователя, Страница: 23 / 32

23
Force update: Will re-write the firmware of the device, no matter whether there is a newer version of the firmware
available at this moment. This can be useful if an earlier update was interrupted or not successful.
Front control > Settings > General settings > Dante:
Will indicate whether there is any Dante network interface card installed, and indicate the firmware version of the
installed Dante network card (if any).
Front control > Settings > General settings > Wall panel:
This menu allows to assign the connected (MWX45) wall panels (multiple wall panels can be daisy-chained on the
RS-485 databus) to one of both zones (amplified output or zone output).
Select the zone (Amplifier / Line out) to be controlled with the corresponding wall panel, and click the ‘Set Zone’
button. The selected output number will start to blink on the display of the wall panel, and after pressing the upper
button on the desired wall panel, it will be assigned to the selected zone.
Simply repeat this action for each connected wall panel in your system.
Front control > Settings > General settings > Factory reset:
The factory settings function will reset all the device settings to factory defaults. It will recall the original factory
settings and all previously made settings will be lost.