AUDAC DW5066, Руководство пользователя и инструкция по установке

Страница: 16 / 29

16
Configuring
Before the DW5066 can be operational, the configurations should be made. First of all, an address
needs to be assigned and the available inputs need to be defined.
Follow these steps to configure:
1) Go to the “Setup” menu and click “System configuration”. Now you have the possibility to choose
between “Paging”, “DW5066” and “DW3020/4020”. To configure the settings for the DW5066
wallpanels, click on the corresponding button. Now a window is displayed which provides all the
configuration possibilities for the DW5066. On the left side, a dropdown list is displayed whereby
the address for the DW5066 can be selected. The address can be selected between “W001” and
“W008”. Logically, you start with address “W001” for the first wall panel, and increases for every
additional wall panel. After the desired address is selected, click the “Set address” button. After this
button is pressed, the DW5066 will start blinking. To confirm the selected address with the wall panel,
click the big rotary button on the front of the wall panel. When this button is pressed, the address will
be assigned to the selected wall panel.