background image

13

Main screen

FM Radio station selection:

• Automatic tuning:
The currently playing FM radio station (if FM mode is 
enabled) is selected by pressing the   (tuning down) and 

 (tuning up) buttons. When pressed, it will automatically 

start searching for the next station with sufficient signal 
strength. The currently tuned frequency will be indicated at 
the center of the screen, also indicating additional carried 
RDS information (if available) such as the currently playing 
station or track name.

• Manual tuning:
The tuning frequency can be manually adjusted by rotating the function dial until the tuned frequency is 
highlighted in blue colour. When highlighted, confirm manual tuning adjustment by single pressing the 
rotary dial and adjust the tuner frequency by rotating clockwise (tuning up) or counter-clockwise (tuning 
down). Once tuned to the desired frequency, confirm the tuned frequency by single pressing the function 
dial once again.

DAB Radio station selection:

The currently playing DAB radio station (if switched to DAB mode) is selected by pressing the   (tuning 
down) and   (tuning up) buttons. When pressed, it will automatically switch to the next available station. 

The currently playing station name is shown, together with additional carried Radio text station information 
such as the currently playing program or track name. More information such as signal reception strength, 
the number of available DAB radio stations and the bitrate of the currently playing station is shown on 
the right side of the screen.

FM/DAB switching:

Switching between DAB and FM mode is done by pressing the 

FM/DAB

 (FM/DAB) button. The current mode 

(FM or DAB) is shown on the display in front of the tuning frequency or station name. When switching to 
DAB mode for the first time, all available stations will be scanned first.

Save radio station:

The currently playing station can be stored to one of the 10 available positions. A horizontal array with 
numbers from 1 to 10 is indicated on the bottom of main tuner screen, representing the 10 positions 
whereto the presets can be saved. Rotate the function dial until the number for radio station storage is 
highlighted, and press the   (save) icon for saving the currently selected frequency to the selected position.

Recall radio station:

A stored radio station can be recalled by rotating the function dial until the number on the horizontal array 
on the bottom of the main tuner screen is highlighted. When highlighted, confirm the recall of the stored 
frequency by single pressing the function dial. The stored frequency under this position is now recalled 
and the radio station will start playing.

General settings:

The   (General settings) button gets you to the general settings menu where all general settings for the 
device can be configured.

FM/DAB

DAB/FM tuner

Содержание DSP40

















Отзывы: