AUDAC DPA152, Руководство пользователя и инструкция по установке

Страница: 12 / 31

11
2) Bridge mono Mode:
When the amplifier is switched in bridge mode, there will be one single load
connected to the amplifier outputs. This load should be connected between the +
terminal of Channel 1 and the – terminal of Channel 2. This can be done by
connecting the loudspeaker between the +1 and -2 terminals of Speakon
connector one. Or when using the Euro Terminal connection blocks, the
loudspeaker should be connected between the + terminal of Channel 1 and the –
terminal of Channel 2.
3) Parallel Mode:
When the amplifier is switched in parallel mode, the connections for the
loudspeakers should be made in the same way as Stereo mode.
Note
Do not connect any 100V line transformers to the loudspeaker outputs of the amplifier.
Connection standards
The in- and output connections of AUDAC audio equipment are performed corresponding to
international wiring standards for professional audio equipment.
XLR:
1 = ground / shield
2 = +sig
3 = -sig
XLR female:
XLR male: