3) Speaker output
A) Loudspeaker output connections:
The loudspeaker output connections are performed using
4-pin terminal block connectors, making it possible to connect
high and low impedance loudspeakers to the amplifier
outputs. Selection can be made between low impedance
(4
Ω
) or constant voltage (100V / 70V) depending on project
requirements. More information about loudspeaker output
connections is described in the ‘connecting the system’
chapter.
A) Input connections:
Balanced mono sources can be connected to the
3.81mm Terminal block input. A gain control potentiometer
adjusts the sensitivity within a range of 0 dB ~ 50 dB which
allows connection for both microphone or line-level audio
sources.
B) Auto standby switch:
The amplifier has an automatic standby function. The amplifier
switches automatically to standby mode when no input signal
is available for 30 minutes. If desired, the automatic standby
mode can be disabled via this switch. The standby function
is by default activated.
B) Linking switch :
Different input channels can be linked together. Pushing the
button between two channels will link them to each other. This
function eliminates the need to connect inputs with cables.
By pushing the buttons sequentially, multiple channels can
be linked together.
A
B
4) Input
A
B
audac.eu
CEP series
100V
70V
COM
100V
70V
COM
100V
70V
COM
100V
70V
COM
CH 4
CH 3
CH 2
CH 1
Auto
Standby
SPEAKER OUTPUT
CH 1
CH 2
CH 3
CH 4
LINK
4/3
LINK
3/2
LINK
2/1
Input adj.
Input adj.
Input adj.I
.
INPUT
Input adj
