CEP series
Multi-zone Amplifier
The quick start guide gives you an overview of all the front and rear panel controls and connections on the
CEP series amplifiers. The CEP series include the CEP408 (4 x 80 Watt) and the CEP 803 (8 x 30 Watt).
It allows you to get started with the installation of it in your project.
To get a detailed explanation of all functions, please check the complete manual which is available on the
web page https://manuals.audac.eu/CEP408 or scan the QR code as shown on top of this page.
Front:
2) Power switch with LED:
Allows to power the system ON and OFF. The indicator LED
illuminates in blue when switched ON.
When switched to
standby (energy-saving) mode, the power LED will illuminate
in orange colour. The amplifier switches automatically to
standby mode when no signal is available for 30 minutes.
2) Rackspace enclosure
The CEP series is equipped with mounting options for a 19”
1HE rackspace.
1) Indicator LED (VU):
The (VU) indicator leds indicate the output
level and status
of the amplifier (Signal / -10dB / Clip / Protect).
1) AC Power inlet:
The mains power supply (100-240V AC - 50/60 Hz) has
to be applied to this AC power inlet. The connection is
made by an IEC C14 power connector.
1
2
Back:
1
3
4
2
Quick start guide
audac.eu
CEP series
CEP408
ON
CH 1
CH 2
CH 3
CH 4
Prot
Clip
-10dB
Sig
Prot
Clip
-10dB
Sig
Prot
Clip
-10dB
Sig
Prot
Clip
-10dB
Sig
100V
70V
COM
100V
70V
COM
100V
70V
COM
100V
70V
COM
CH 4
CH 3
CH 2
CH 1
CH 1
CH 2
CH 3
CH 4
LINK
4/3
LINK
3/2
LINK
2/1
Input adj.
Input adj.
Input adj.I
nput adj.
Auto
Standby
SPEAKER OUTPUT
INPUT
