AUDAC AXIR/O Series Скачать руководство пользователя страница 3

3

Introduction

AXIR/O Outdoor Design Column Speaker

The AXIR/O are design column speakers which are especially designed for providing an 
extraordinary sound with surprisingly high power in outdoor or humid environments where 
a high audibility and clear reproduction of music and speech are desired.

They are equipped with a specially designed waterproof AWX-5 connector, providing selection 
out of 4 different power taps. Three power taps for 40 Watt, 20 Watt and 10 Watt for use 
in 100 Volt constant voltage public address systems and one power tap for 6 Ohm low 
impedance applications are provided. 

A separate UV resistant cloth in front of every driver keeps the elements of nature at a 
safe distance, while a special cone treatment for the speakers protects against penetrating 
humidity. Further added reliability is achieved by using an aluminium front grill and an 
electroplated stainless steel mounting bracket.

The stylish and elegant aluminum housing in combination with the lightweight design and 
the specially designed wall bracket, which allows focussing of the speaker in any direction, 
ensure the best possible appearance combined with a great sound and high audibility.

All the special measures of the loudspeaker makes it weather and humidity resistant according 
to the IP55 regulation.

Содержание AXIR/O Series













Отзывы: