TI044
02/2014 3/4
Press the
HOUR
and
MIN
buttons to set the time.
Example
: If you want your lights to turn On at sunset and to turn
Off at 10:00 PM, set
P1 OFF
to
22:00
. If you also want your
lights to turn back On at 5:00 AM then turn Off at sunrise, set
P2 ON
to
5:00
.
NOTE
:
P1 OFF
and
P2 OFF
have priority over
P1 ON
and
P2 ON
respectively. For example, if sunrise is at 4:58 and
P2 ON
is set to 5:00, the lights will not turn on.
You can replace the sunrise and sunset times by fixed times.
Select program
P1 ON
or
P2 OFF
and enter the desired time
using the
HOUR
and
MIN
buttons.
Press the
MODE
button to return to normal operation.
Clearing a programmed time
Press the
PGM
button to display the programmed time.
Press the
CODE
button. The time will be erased and
--:--
will be
displayed.
NOTE: For P1 ON and P2 OFF, if you have programmed the city
parameters, the programmed time will be replaced by sunset
time and sunrise time respectively.
Press the
MODE
button to return to normal operation.
Supply
: 120 VAC, 50 / 60 Hz
Maximum load
: See section 1
Outputs (for both loads)
: Single Pole Single Throw (SPST)
Input (for 3-way installation only)
: Requires a dry contact
Battery backup
: During a power outage, the screen is blank but the
programs are preserved using an internal rechargeable battery.
Operating temperature range
: -40 °C to 50 °C (-40 °F to 122 °F)
Solar table precision
: +/- 11 min. (max error around poles)
Enclosure type
: 3R
Certifications
: CSA & UL
Honeywell warrants this product, excluding battery, to be free from defects in
the workmanship or materials, under normal use and service, for a period of
three (3) years from the date of purchase by the consumer. If at any time
during the warranty period the product is determined to be defective or mal-
functions, Honeywell shall repair or replace it (at Honeywell's option).
If the product is defective,
(i)
return it, with a bill of sale or other dated proof of purchase, to the place
from which you purchased it, or
(ii)
contact Honeywell. Honeywell will make the determination whether the
product should be returned, or whether a replacement product can be
sent to you.
This warranty does not cover removal or reinstallation costs. This warranty
shall not apply if it is shown by Honeywell that the defect or malfunction was
caused by damage which occurred while the product was in the possession of
a consumer.
Honeywell's sole responsibility shall be to repair or replace the product within
the terms stated above. HONEYWELL SHALL NOT BE LIABLE FOR ANY
LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY,
FROM ANY BREACH OF ANY WARRANTY, EXPRESS OR IMPLIED, OR
ANY OTHER FAILURE OF THIS PRODUCT. Some provinces, states or
regions do not allow the exclusion or limitation of incidental or consequential
damages, so this limitation may not apply to you.
THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL
MAKES ON THIS PRODUCT. THE DURATION OF ANY IMPLIED WARRAN-
TIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FIT-
NESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED TO THE
THREE-YEAR DURATION OF THIS WARRANTY. Some provinces, states or
regions do not allow limitations on how long an implied warranty lasts, so the
above limitation may not apply to you.
This warranty gives you specific legal rights, and you may have other rights
which vary according to the province, state or region.
If you have any questions on the product installation or operation,
contact us at:
705 Montrichard Avenue
Saint-Jean-sur-Richelieu, Quebec
J2X 5K8
Canada
Tel.: 1-800-831-2823
Email: [email protected]
For more information on our products, go to
www.aubetech.com
P1 ON
:
20:38
(sunset)
P1 OFF
:
--:--
(blank)
P2 ON
:
--:--
(blank)
P2 OFF
:
6:10
(sunrise)
P1 ON
:
20:38
(sunset)
P1 OFF
:
22:00
(programmed)
P2 ON
:
5:00
(programmed)
P2 OFF
:
6:10
(sunrise)
Technical Specifications
8.
Warranty
9.
Customer Assistance
10.
