Aube Technologies TH141A-HC-28, Инструкция по эксплуатации

Страница: 6 / 9

Note: For temperature increases (Prog. 1 and 3), allow at least 15 minutes per °C. If you have
lowered the temperature by 3 °C during the night and you wake up at 7 AM, change
the setting at 6:15 AM.
For savings to be obtained, you must lower the temperature for a period of 2 to 3
times the delay required to bring the temperature back to your comfort level.
Example:
If your system takes one hour to go from your saving temperature level to
your comfort temperature level, it is useless to lower the temperature for a period of 2
to 3 hours.
a) To Program your Schedule
1. Press the Program button to access the programming mode.
2. Press the Day button to select the day to be programmed. You can select
all days of the week by pressing on the Day button for 3 seconds.
16
Program Mode Time
1 Wake-up time
2 Leaving time
3 Return time
4 Bed time
3. Press the Program button to select program 1, 2, 3 or 4.
4. Press the Hour and Minute buttons to program the time.
5. When you have completed your programming, press the Manual/Auto button
to exit this function.
b) To Erase a Program
Select the program using the Program and Day buttons, and press the Clear button.
The time zone displays --:-- when the program is inactive.
c) Example 1: Comfort period from 7:00 AM to 10:30 PM
Economy period from 10:30 PM to 7:00 AM
Identical schedule for all days of the week.
1. Press the Program button to access the programming mode.
2. Press the Day button (3 seconds) to select every day of the week.
3. Press the Hour button to enter 7:00 AM, Prog. 1 .
4. Press the Program button again to select Prog. 2 , and press the Hour and
Minute buttons to enter 10:30 PM.
17
5. Press the Manual/Auto button to exit this function.
d) Example 2: Comfort period: Monday to Friday from 6:15 AM to 8:15 AM and
from 5:00 PM to 10:00 PM.
Note: It is faster to program the same schedule for every day and then modify the exception days.
1. Press the Program button to access the programming mode.
2. Press the Day button (3 seconds) to select every day of the week.
3. Press the Hour and Minute buttons to enter 6:15 AM (Prog. 1 ).
4. Press the Program button to select Prog. 2 and the Hour and Minute buttons to
enter 8:15 AM.
5. Repeat step 4 to enter Prog. 3 (5:00 PM) and Prog. 4 (10:00 PM).
Note : When making modifications, make sure that you are in the right program.
18
Shedule/Day Mon. Tues. Wed. Thu. Fri. Sat. Sun.
PROG. 1 6h15 AM 6h15 AM 6h15 AM 6h15 AM 6h15 AM 7h30 AM 7h30 AM
PROG. 2 8h15 AM 8h15 AM 8h15 AM 8h15 AM 8h15 AM ---- ----
PROG. 3 5h00 PM 5h00 PM 5h00 PM 5h00 PM 5h00 PM ---- ----
PROG. 4 10h00 PM 10h00 PM 10h00PM 10h00 PM 10h00 PM 11h00 PM 11h00 PM
To modify the Saturday and Sunday schedules:
6. Press the Day button until SA or SU is displayed.
7. Press the Program button to select Prog. 1 and the Hour and Minute buttons to
enter 7:30 AM.
8. Press the Program button to select Prog. 2 and than press the Clear button to
erase it.
9. Press the Program button to select Prog. 3 and then the Clear button to erase it.
10.Press the Program button to select Prog. 4 and then the Hour and Minute
buttons to enter 11:00 PM.
11.Press the Manual/Auto button to exit this function.
3.2.2 T
EMPORARY OR PERMANENT TEMPERATURE BYPASS
This operation allows you to temporarily modify the room temperature while you are
in the automatic mode. Simply press the
buttons to select the desired tempe-
rature, or the or button to select the Comfort or Econo settings you have pro-
grammed.This temperature will be maintained until the beginning of the next
programmed schedule.
19