17
S
af
et
y P
recautions/Not
es on w
at
er and dust r
esist
ance
Closing the battery cover
Close firmly so that the battery cover is not raised.
1
Hold battery cover with two foremost tabs at angle, and insert in cell phone.
2
Check that lock switch is unlocked, and press along the arrows in directions
of
①
to
②
. Always check that battery cover is not raised.
3
Slide lock switch to right until the arrow is no longer visible.
②
②
①
①
Precautions
■
Notes on various usage scenes
<In the rain>
• Do not use in heavy rain (more than 20 mm per hour).
• Never open/close the external connection terminal cover or battery cover if the
product is exposed to rain, or your hands are wet.
<Bathroom>
• Do not immerse or drop in tub. Do not use under water.
• Do not immerse the product in soap water, detergent water, water with bath
salts in it, or in hot spring water.
• Do not expose directly to warm shower.
• Do not splash the product with hot water.
• Do not use the product in a bathroom for an extended period of time.
• Use in temperatures between 5°C and 35°C (limited use between 36°C and
40°C) and humidity between 35% and 90%.
• Do not bring the desktop holder into a bathroom. Also, do not use the desktop
holder if it has condensation.
<In the kitchen>
• Do not splash the product with or immerse it in liquids such as soap water,
detergent water, seasonings, juices, etc. other than fresh water/tap water.
• Do not splash the product with or immerse it in hot water or chilled water.
• Do not place the product where it gets extremely hot or cold such as near a
stove or in a refrigerator.
• Do not expose to strong water flow (more than 6 L/min.).
<Poolside>
• Do not immerse or drop in pool water. Do not use under water.
• Pool water contains disinfecting chlorine. If exposed to pool water, immediately
wash off with room temperature tap water*. Do not use a brush.
* Rather weak water flow (less than 6 L/min.)
■
Common precautions
• Firmly close the cover of the external connection terminal, and firmly attach
then lock the battery cover after checking that the rubber seal on the underside
is positioned correctly. A caught particle (lint, a hair, grain of sand, etc.), no
matter how small, may result in seepage.
• Do not insert pointed objects in gaps around the cover of the external
connection terminal or battery cover. Doing so might damage the rubber seals
and cause seepage.
• Do not open/close the cover of the external connection terminal or remove/
attach the battery cover while wearing gloves. A caught particle (lint, a hair,
grain of sand, etc.) on the gloves, no matter how small, may result in seepage.
• Before opening/closing the cover of the external connection terminal or
removing/attaching the batter cover, check that there is no wetting, sand,
soiling, etc. on the cell phone or your hands. Wetting, sand, soiling, etc. on
them may enter the cell phone or become caught under the covers and cause
malfunction or seepage. If even a small amount is present, wipe cell phone and
hands with a lint-free, clean, dry cloth before working.
• Do not leave the cell phone with wetting on it. Wetting may enter the cell phone
from the hinge or other gap. If the cell phone remains wet, sound quality may
be affected. If wetted with water, remove water such as by shaking the cell
phone (page 19), then quickly wipe away any water on the cell phone with a
lint-free, clean, dry cloth. In cold regions, any water on the K012 may freeze
and result in malfunction.
