18
Safety Precautions/Notes on water resistance
Closing the battery cover
Close firmly so that the battery cover is not raised.
Place the battery cover aligning its tabs with the grooves of the main unit.
Push the battery cover in the direction of the arrow.
Press and slide your finger over the circumference of the battery cover in the
direction of the arrow to firmly attach it.
Grooves
Tabs
Precautions
■
Notes on various usage scenes
<In the rain>
• Do not use in heavy rain (more than 20 mm per hour).
• Never open/close the external connection jack cover or battery cover if the
product is exposed to rain, or your hands are wet.
<Bathroom>
• Do not immerse or drop in tub. Do not use under water.
• Do not immerse the product in soap water, detergent water, water with bath
salts in it, or in hot spring water.
• Do not expose directly to warm shower.
• Do not splash the product with hot water.
• Do not use the product in a bathroom for an extended period of time.
• Use in temperatures between 5°C and 35°C (limited use between 36°C and
40°C) and humidity between 35% and 90%.
• Do not bring the desktop holder (sold separately) into a bathroom. Also, do not
use the desktop holder if it has condensation.
<In the kitchen>
• Do not splash the product with or immerse it in liquids such as soap water,
detergent water, seasonings, juices, etc. other than fresh water/tap water.
• Do not splash the product with or immerse it in hot water or chilled water.
• Do not place the product where it gets extremely hot or cold such as near a
stove or in a refrigerator.
• Do not expose to strong water flow (more than 6 L/min.).
• When viewing 1Seg, place the product on a stable surface.
<Poolside>
• Do not immerse or drop in pool water. Do not use under water.
• Pool water contains disinfecting chlorine. If exposed to pool water, immediately
wash off with room temperature tap water*. Do not use a brush.
* Rather weak water flow (less than 6 L/min.)
• When viewing 1Seg, place the product on a stable surface.
■
Common precautions
• Firmly close the cover of the external connection jack, and firmly attach the
battery cover after checking that the rubber seal on the underside is positioned
correctly. A caught particle (lint, a hair, grain of sand, etc.), no matter how
small, may result in seepage.
• Do not insert pointed objects in gaps around the cover of the external
connection jack or battery cover. Doing so might damage the rubber seals and
cause seepage.
• Do not open/close the cover of the external connection jack or remove/attach
the battery cover while wearing gloves. A caught particle (lint, a hair, grain of
sand, etc.) on the gloves, no matter how small, may result in seepage.
• Before opening/closing the cover of the external connection jack or removing/
attaching the batter cover, check that there is no wetting, sand, soiling, etc. on
the cell phone or your hands. Wetting, sand, soiling, etc. on them may enter the
cell phone or become caught under the covers and cause malfunction or
seepage. If even a small amount is present, wipe cell phone and hands with a
lint-free, clean, dry cloth before working.
H32̲BasicManual.indb 18
H32̲BasicManual.indb 18
2012/06/20 10:16:31
2012/06/20 10:16:31
