Basic Manual
─ 1 ─
Thank you for buying the ARROWS Z FJL22 (simply called the
"FJL22" or "product" from here on).
Before using the product, be sure to read the "FJL22 Setting
Guide", "Basic Manual" (this manual) to ensure correct use.
After you have finished reading this manual, be sure to store it
in a safe place so that you can retrieve it whenever needed.
■ "FJL22 Setting Guide"/"Basic Manual" (this
manual)
Handles only basic operations for main features.
For detailed descriptions of various functions, refer to the "取扱
説明書 (Instruction Manual)" (Japanese) application that can be
used on your FJL22 or "取扱説明書詳細版 (Full Instruction
Manual)" (Japanese) on the au homepage.
http://www.au.kddi.com/support/mobile/guide/manual/
■ "取扱説明書 (Instruction Manual)" (Japanese)
Application
You can use the "取扱説明書 (Instruction Manual)" application
on the FJL22 to confirm detailed operational procedures.
Certain functions can be directly activated from the
application screens on which their operations are described.
In the home screen,
→"取扱説明書 (Instruction Manual)"
■ Downloading Manuals
You can download the "Basic Manual" (this manual), "取扱説明
書 (Instruction Manual)" (Accessory) (Japanese) and "取扱説明
書詳細版 (Full Instruction Manual)" (Japanese) in PDF format
from the au homepage.
Download URL:
http://www.au.kddi.com/support/mobile/guide/manual/
Preface
About Operating Instructions
─ 2 ─
Before you start using the product, be sure to read the "Safety
Precautions" to ensure correct use.
Before you assume that the product is malfunctioning, check
for possible remedies in the following au Customer Support
site of au homepage:
http://www.au.kddi.com/support/mobile/trouble/repair
•
Communication is not possible even inside the service area
in places where the signal does not reach (e.g. tunnels and
basements). Also, communication is sometimes not
possible in poor reception areas. Communication is
sometimes interrupted if you move into a poor reception
areas during communications.
•
Since this product uses radio waves, the possibility of
communication intercepts by third parties cannot be
eliminated. (Though LTE/CDMA/GSM/UMTS system has
highly secure confidential communication features.)
•
Since this product is a radio station under the Radio Law,
you may be asked to temporarily submit the product for
inspection in accordance with the Radio Law.
•
IMEI information of your cell phone is automatically sent to
KDDI CORPORATION for maintenance and monitoring
operational status of your cell phone.
•
Take care not to inconvenience people around you when you
use the product in a public place.
•
When the product is used by a child, parents or guardians
should thoroughly read the "Instruction Manual" and teach
the child how to use it.
•
The FJL22 is compatible with the international roaming
service. Each network service varies depending on the area
and service content.
Safety precautions
When using the product
─ 3 ─
•
To use the product overseas, check the condition such as
regulations of the country/region beforehand.
•
As with PCs, some user-installed applications may disrupt
the stability of the FJL22 performance, or unexpectedly
transmit information via the Internet causing improper use of
your location information as well as personal information
recorded on the FJL22. Therefore, verify the supplier and
operating conditions of the applications to be used before
using them.
Cell phones always emit weak radio waves when power is on.
Use cell phones in an enjoyable and safe manner without
forgetting to be considerate of others around you.
■ Use of cell phones is not allowed in some places
•
Do not use a cell phone while driving a car or riding a
motorbike or bicycle. It may cause a traffic accident. Use of
a cell phone while driving a car or motorbike is prohibited by
law. Use of a cell phone while riding a bicycle may be
punishable by some regulations.
•
Do not use this product while you are aboard an airplane.
Use of electric devices transmitting radio waves in airplane
is prohibited by law. Some airline companies, however, allow
their passengers to use cell phones. For details, contact the
airline company you use.
Cell phone etiquette
─ 4 ─
Before your start using the product, make sure that you have
all the following packaged with the product.
■ Main unit
FJL22
■ Accessories
Desktop Holder (Rapid charging desktop holder: FJL22PUA)
Basic package and main peripheral
equipment
─ 5 ─
AC adapter (AC adapter for Desktop Holder: FJL22PQA)
TV antenna cable (TV antenna cable compatible with Full Seg:
01FJHSA)
•
FJL22設定ガイド (Setting Guide) (Japanese)
•
取扱説明書 (Instruction Manual) (Japanese)
•
安全上のご注意 (Safety Precautions) (Japanese)
•
携帯電話機の比吸収率などについて (Specific Absorption Rate of
Mobile Phone) (Japanese)
•
本体保証書 (FJL22 Warranty) (Japanese)
•
卓上ホルダ専用ACアダプタ保証書 (Warranty of AC adapter for
Desktop Holder) (Japanese)
The following items are not included in the package.
•
Illustrations of cell phones and peripheral devices in this
manual are only for reference. They may look different from
the actual product.
•
microSD card
•
Stereo earphone
•
microUSB cable
─ 6 ─
In this manual, keys are represented by simplified illustrations
as shown below.
Notations used for operation procedures in this manual are as
follows.
Tapping is to select a button or icon displayed on the screen
by lightly tapping it with your finger (
X
P.22).
* If not clearly indicated in the operation procedures of this manual, start
the operation from the home screen.
Regarding notations used in this
document
Keys used in this manual
Indications used for the operation of selecting
items/icons/buttons, etc.
Description
Explanation
In the home screen,
(NX! Dial)→"1" "4"
"1"→"Outgoing call"
Tap
at the bottom left of the home
screen. And tap
,
,
, then tap
"Outgoing call" at the end.
In the home screen,
→"Settings"
Tap
at the bottom of the home screen
and tap
from the displayed menu.
→"Settings"
Tap
and from the displayed option
menu, tap "Settings".
U
D
P
─ 7 ─
Screen illustrations shown in this manual may look different
from the actual screens. In some cases, upper or lower part of
a screen may be omitted.
◎ Explanations of this manual are based on the case when the
product color is "White" with default settings (design theme such
as wallpaper and icons) as an example. Keys and screens may be
different from the actual ones. In some cases, minor details or a
part of a screen may be omitted. Also illustrations may be
different.
◎ In this manual, "microSD
™
memory card (commercially available)",
"microSDHC
™
memory card (commercially available)" and
"microSDXC
™
memory card (commercially available)" are
abbreviated as "microSD card".
◎ In this manual, operations to enter secret code or password, etc.
or to authenticate with fingerprint or face are described as
"authenticate".
Screen displayed used in this manual
─ 8 ─
Getting Ready
Names and functions of parts
i
j
h
g
k
e
f
b
a
l
p
d
m
n
o
c
─ 9 ─
a
microSD card slot
b
Infrared data port
c
au Micro IC Card (LTE) slot
d
Stereo earphone terminal
e
Volume key
U
/
D
f
Power key
P
Press and hold to display the phone options menu.
Press briefly to set/cancel sleep mode (
X
P.20).
g
Strap hole
h
Proximity sensor/RGB sensor
Proximity sensor prevents from erroneous operation of
touch panel during a call.
RGB sensor detects ambient brightness to adjust
backlight of the display automatically.
i
Earpiece (receiver)/Notification LED
Light according to the settings if incoming calls,
unchecked missed calls, or new mails (if mail notification is
on) exist.
j
In-camera
k
Display (Touch panel)
l
Navigation bar
m
Microphone
n
External connection terminal
q
q
r
t
u
v
w
x
s
m
─ 10 ─
o
Speaker
p
Desktop holder charging terminal
q
Built-in antenna
r
mark
s
FM transmitter antenna
t
Out-camera
u
GPS antenna
v
Bluetooth
£
/Wi-Fi
£
antenna
w
Mobile flash
x
Fingerprint sensor
Use to cancel screen lock etc.
◎ Do not put a sheet (peep prevention sheet etc.) or decoration
seal on the proximity sensor/RGB sensor/built-in antenna/GPS
antenna.
◎ Covering the proximity sensor/RGB sensor during a call turns off
the screen.
◎ Touching or covering the built-in antenna with your fingers or
metal objects while holding the FJL22 may lower the receiving
sensitivity.
◎ Do not cover the microphone with hand etc. during a call or while
recording.
◎ Open the slot cover to use the infrared data port.
─ 11 ─
Your phone number etc. is recorded in the
au Micro IC Card (LTE). If the au Micro IC
Card (LTE) is not correctly attached to the
FJL22, outgoing and receiving calls,
sending and receiving mails cannot be
operated. Besides, other functions using your phone number
etc. may not be used.
The FJL22 supports only au Micro IC Card (LTE). You cannot
use the product replacing the au IC-Card or micro au IC-Card
used on an au cell phone or au smartphone.
•
Always turn off the power of the FJL22 before attaching/
removing au Micro IC Card (LTE).
■ Attaching the au Micro IC Card (LTE)
a
Put the display side down and open the slot cover
b
Hook your finger by the tab on the tray and pull
the tray straight out
•
Tray for au Micro IC Card (LTE) is designed to be
removed. Be careful not to lose.
au Micro IC Card (LTE)
Attaching/removing au Micro IC Card (LTE)
au Micro IC Card (LTE)
IC (metal) part
IC
Notch
Tray
Tab
Slot cover
─ 12 ─
c
Place au Micro IC Card (LTE) facing the IC (metal)
part up on the tray and push the tray in
•
Make sure the direction of the notch.
d
Close the slot cover and ensure that the cover is
not partially open
■ Removing au Micro IC Card (LTE)
a
Put the display side down and open the slot cover
b
Pull straight out the tray hooking your finger by
the tab on the tray to take the au Micro IC Card
(LTE) out
c
Push the tray in, and then close the slot cover
ensuring that the cover is not partially open
Tab
─ 13 ─
◎ Note the following points, otherwise handling the au Micro IC
Card (LTE) may cause malfunction or damage.
•
Do not touch the IC (metal) part of the au Micro IC Card (LTE) or
the IC card terminal inside the FJL22.
•
Insert in the correct direction.
•
Do not use force to attach or remove.
◎ When an au Micro IC Card (LTE) is not attached properly or au
Micro IC Card (LTE) is abnormal, an error message appears.
◎ Do not lose the au Micro IC Card (LTE) after it has been removed.
◎ Do not insert an au Nano IC Card (LTE) which a conversion
adapter is attached. Doing so might cause a fault.
─ 14 ─
The battery is not fully charged when purchased. Make sure to
charge the battery before use.
The internal battery is a consumable item. Available usage
time with each charging decreases bit by bit.
Charging with the desktop holder and AC adapter (supplied) is
explained.
a
Insert the power cable to the AC adapter
(supplied)
b
Insert the connector of the AC adapter (supplied)
to the power terminal of the desktop holder
c
Push the FJL22 into the desktop holder until it
clicks
d
Insert the power plug of the power cable to an
outlet
e
Make sure the notification LED turns in red
•
When charging ends, the LED turns off.
f
When charging is finished, remove the power plug
of the power cable from the outlet and then
remove the FJL22 from the desktop holder
g
Remove the connector of the AC adapter
(supplied) main unit from the desktop holder
Charging
Charging with the desktop holder and AC
adapter (supplied)
─ 15 ─
◎ Do not make a call or receive a call with the FJL22 installed in
the desktop holder.
◎ Remove the attachment to charge the FJL22 with a
commercially available cover attached using the desktop holder.
Slide the attachment upward to remove it. However, charging
may be unavailable for some covers.
◎ Make sure that the charging terminal is clean before charging
with the desktop holder. When it is dirty, clean the charging
terminal with dry cotton swabs, etc.
AC 100V-240V
outlet
Power plug
AC adapter
main unit
Notification LED
Attachment
Desktop Holder
Power terminal
Power cable
Connector
─ 16 ─
Charging with the Common AC Adapter 04 (sold separately) is
explained. (Note that your AC adapter may be different from
this illustration.)
a
Insert the microUSB plug of the Common AC
Adapter 04 (sold separately) to the external
connection terminal of the FJL22.
•
microUSB plug has orientation. Face convex part
(▲) of the plug terminal down and then insert it into the
external connection terminal straight. Connecting the
microUSB plug with an incorrect orientation might cause
failure of external connection terminal of FJL22.
•
Do not connect the microUSB plug etc., to the external
connection terminal when there is water remaining even
though the external connection terminal provides
waterproofness. Doing so might cause short circuit
resulting in malfunctions or a burns.
b
Insert the power plug of Common AC Adapter 04
(sold separately) into an outlet (100V-240V AC)
c
Make sure the notification LED turns in red
•
When charging ends, the LED turns off.
d
Remove the power plug of the Common AC
Adapter 04 (sold separately) from the outlet after
charging is complete
e
Hold microUSB plug and pull it out straight
Charging with specified AC Adapter (sold
separately)
─ 17 ─
◎ Alternatively, you can connect the FJL22 and a PC with a
microUSB cable 01 (sold separately) to charge. When a screen
for "新しいハードウェアの検索ウィザードの開始 (new hardware
detection)" appears on the PC, select "キャンセル (Cancel)".
a
Press
P
for over 2 seconds
The notification LED turns in green and the FJL22
vibrates once. The lock screen appears after a while.
b
Slide
to any direction on the lock screen
The screen is unlocked and the home screen appears.
Turning the power on/off
Turning the power on
AC 100V-240V outlet
Notification LED
Common AC Adapter 04
(sold separately)
microUSB plug
microUSB
plug side
External connection
terminal side
─ 18 ─
◎ Do not touch the fingerprint sensor before the lock screen
appears after pressing
P
. The fingerprint sensor function
becomes unavailable. If a warning message prompting you for
rebooting appears, reboot the product.
◎ "auへようこそ (Welcome to au)" screen appears for the first time
you turned the power on.
◎ When you tap
for the first time, a guide for operations
appears.
a
Press and hold
P
until the phone options menu
appears
b
"Power off"
→
"OK"
•
Press and hold
P
for over 8 seconds to turn the power
off forcibly.
Default language is Japanese. Press
to skip the Japanese
initial setting screen, then switch language to English
according to the following steps.
a
In the home screen,
→
"本体設定 (Settings)"
→
"言
語と入力 (Language & input)"
b
"Language"
→
"English"
Turning the power off
Switching the display language to
English
─ 19 ─
After switching the display language to English, turn the
power off and on again. "Welcome to au" screen appears.
Follow the onscreen instructions to make settings. After au
Easy Setting completes, ARROWS Getting started screen
appears. Follow the onscreen instructions to set up.
a
In the Welcome to au screen, "Next"
b
In "au ID Setting", "Registration"
A confirmation screen appears. Check the contents, then
tap "OK" to set au ID.
c
Set "Setting of data handover"
→
"Next"
•
When there is data to transfer, set up and tap "Agree,
and next".
d
Set "Setting of backup"→Mark service to use→
Tap "Agree, and next"
•
Confirm the Terms of Service/Outline of Service.
e
Set "au Widget/LISMO Setting"→Mark service to
use→Tap "Agree, and next"
•
Confirm the Terms of Service/Outline of Service.
f
Set "Setup for emergency"→Mark service to use→
Tap "Agree, and next"
•
Confirm the Terms of Service/Outline of Service.
g
"Finish"
au Easy Setting is completed.
The ARROWS Getting started screen appears.
•
Mark "Don't show again" not to show the screen from the
next time.
h
Set "Google account"
i
Set "Physical profile"
j
"Complete then go next"
→
"Start right now"
The ARROWS Getting started completes.
Initial settings
─ 20 ─
◎ Some items can be set/changed later.
Other initial settings
◎ Make the following settings as required.
•
E-mail (@ezweb.ne.jp) initial settings
•
Account setting for PC-mail
•
Wireless LAN (Wi-Fi
£
) function setting
When no operation has been made on the FJL22 for a certain
period, the screen automatically turns off according to "Sleep/
Lit when held" setting.
a
In sleep mode,
P
Sleep mode is canceled.
•
Pressing
P
during operation lets the screen into sleep
mode.
If screen turns off or lock screen
appears
Canceling sleep mode
─ 21 ─
a
Slide
to any direction
The screen is unlocked.
◎ Unlock the screen by authenticating depending on the Security
unlock preference you set.
◎ On the authenticating screen, tap "EMERGENCY CALL" to display
the dial pad and make an emergency call.
Press the fingerprint sensor to cancel sleep mode, then slide
your finger to cancel the screen lock.
a
In sleep mode, press the fingerprint sensor
Sleep mode is canceled.
•
Pressing the fingerprint sensor during operation goes
into sleep mode.
b
Slide your finger on the fingerprint sensor
The screen is unlocked.
•
First, press the fingerprint sensor, then release and slide
the finger.
Unlocking screen
Unlocking with fingerprint sensor
─ 22 ─
◎ To unlock the lock screen by fingerprint authentication, set
"Security unlock preference" to "Fingerprint".
Basic Operation
The basic operations of the FJL22 is described here.
The display on the FJL22 is a touch panel operated by
touching it with your finger.
•
If display is dirty or wet with sweat or water drops, the touch
panel might operate incorrectly. Wipe off the display surface
thoroughly.
■ Tap/Double-tap
Lightly touch an item or icon on the screen with your finger to
select. Double tap: Tap the same position twice.
■ Long-touch
Keep touching an item or icon on the screen with your finger.
Use for displaying pop-up menu etc.
■ Flick
When there are multiple pages or data such as in
the home screen, Gallery, etc., quickly flick off the
screen up/down/left/right to switch the screens.
■ Drag
Keep touching and move an item or icon on the
screen with your finger.
Using the touch panel
─ 23 ─
■ Slide
Touch to move the screen to show the hidden part if the entire
view does not fit into a screen
when displaying the setting menu, web page, PDF file, zoomed
still image, etc.
■ Pinch
While Web page or a still image is displayed, widen
the distance of two fingers on the screen (pinch-out)
to zoom in, or narrow down the distance between the
two fingers (pinch-in) to zoom out.
Icons indicating the status of the FJL22 appear in the status
bar at the top of the screen.
Screen
Understanding icons
Main notification icons
New Gmail
New PC-mail
New SMS, Message notification of Answering service EX,
Incoming notification
New E-mail
GPS positioning
Main status icons
Connected to wireless LAN (Wi-Fi
£
)
/
/
/
Manner mode (
X
P.29)
Multi-connection enabled
Status icons
Notification icons
Status bar
